Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: need tech help with oscilloscope and arcade monitor readings  (Read 1582 times)

0 Members and 1 Guest are viewing this topic.

desmatic

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 216
  • Last login:June 25, 2006, 02:25:53 pm
    • Easy MameCab
need tech help with oscilloscope and arcade monitor readings
« on: January 15, 2005, 11:31:10 am »
I'm looking to test the video signals for arcade monitor frequencies, and I've stumbled upon a cheap effective solution, though I'm not sure whether or not it will work.  There's a program that turns the mic input of your sound card into an oscilloscope, however, I'm under the impression that the sound card input is ac and that vga output is DC.  Anyone know enough about electronics to if this is true?

Also anyone have any experience with http://www.picotech.com oscilloscopes.  They're offering the cheapest solution I could find, an ouchy 600 dollar solution.

D_Zoot

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 402
  • Last login:November 18, 2010, 03:59:37 pm
  • Sorry if I get any spit on you...
Re: need tech help with oscilloscope and arcade monitor readings
« Reply #1 on: January 16, 2005, 10:32:08 am »
Also anyone have any experience with http://www.picotech.com oscilloscopes.  They're offering the cheapest solution I could find, an ouchy 600 dollar solution.


IMHO,  you would be better off with a real scope than a PC based unit.   A real scope is more portable and easier to get next to your work.  Plus, there's often a lag factor with inexpensive PC based units.

You can buy a real scope new for well under 600 bucks.   
Here's one example:
jameco.com link

You could probably get a used one from ebay cheaper than that still.

I'd do that before I spent more money on any PC based units.


Regards,
D
« Last Edit: January 16, 2005, 12:10:33 pm by Peale »

desmatic

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 216
  • Last login:June 25, 2006, 02:25:53 pm
    • Easy MameCab
Re: need tech help with oscilloscope and arcade monitor readings
« Reply #2 on: January 16, 2005, 11:22:35 am »
Thanks.  The PC solutions looked cool, but the more reading I do the less attractive they become.  I'll probably go with you suggestion and just get a traditional oscilloscope off of ebay.
« Last Edit: January 16, 2005, 12:11:08 pm by Peale »

desmatic

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 216
  • Last login:June 25, 2006, 02:25:53 pm
    • Easy MameCab
Re: need tech help with oscilloscope and arcade monitor readings
« Reply #3 on: January 16, 2005, 03:34:44 pm »
Just got one off ebay, a "like new" LG OS-5020G 20mHz Analog Oscilloscope.  yummy yummy.  I'm hoping this will bring video card testing for arcade monitors to a whole new level.

Anyone have any experience with these LG oscilloscopes?  From my reading they look like bottom of the line, affordable amateur stuff.  Retail for around $500 (got it off ebay for $130).