Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: SHUFFLEBOARD  (Read 1684 times)

0 Members and 1 Guest are viewing this topic.

Peter Baluk

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 127
  • Last login:September 30, 2006, 10:36:37 am
  • heavy load! in Brantford ,Ontario
SHUFFLEBOARD
« on: December 09, 2004, 05:43:05 pm »
Anyone have schematics available for a National Board.Would be appreciated.Someone did a job on the one at our legion and when I opened it they had used nothing but whitewire to do the job.
Thanks in advance Peter
IF IT HAS ,TIRES

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: SHUFFLEBOARD
« Reply #1 on: December 09, 2004, 06:51:20 pm »
You mean an AMERICAN SHUFFLEBOARD brand? If so, they have changed hands several times over the past few years. They used to be in Paterson Plank, New Jersey for many many years, but they've moved so much lately I don't know where they are now.

I think their last name change was Venture Entertainment Products Company at phone number 1-800-461-2525 or fax (732) 914-9166. They did make an electronic scorehead retrofit kit for the old electromechanical models.

BTW, many American Legion, VFW, Eagles lodges, taverns, etc in my area still are operating these old electromechanical shuffleboards even though many of these tables are 40+ years old. Just keep the stepper units cleaned, adjusted, and properly lubed and they'll run and run. Naturally you'll need several boxes for of #47 miniature lamps for these babies.