Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: How to mount the EYGO 27" READ!!  (Read 2178 times)

0 Members and 1 Guest are viewing this topic.

electricd

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 501
  • Last login:February 14, 2025, 07:59:10 pm
  • I'm not a llama!
How to mount the EYGO 27" READ!!
« on: September 23, 2002, 02:51:03 pm »
Ok, I bought the EYGO 27" monitor, and love it.  The problem was how to mount this sucker!  Its huge, and the metal chasis is weird.  I didnt want to build a mount out of wood and remove the screen from the metal chasis so here is what i did.  I cut 2 13.5 inch sections of 2X4.  Next I used my slot bit for my router (same one I used for t-molding) and cut a slot on the narrow side of the 2X4 sections.  I cut the slot about 3/4" in on the boards.  I then pressed each side of the metal chasis into the a slot on each of the 2X4s.  Then all that was left was attaching the 2X4's to the monitor platform with wood screws.  Thats it!  The monitor is secured tightly in the 2X4's and they are screwed into my platform.  A great and EASY way to mount these suckers.  I will try and get pictures if anyone wants them.

ED7

Mordy Ovits

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 8
  • Last login:November 04, 2002, 02:50:33 pm
  • Press any key to continue
Re:How to mount the EYGO 27" READ!!
« Reply #1 on: October 16, 2002, 04:49:57 pm »
Pictures would be nice :-)

electricd

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 501
  • Last login:February 14, 2025, 07:59:10 pm
  • I'm not a llama!
Re:How to mount the EYGO 27" READ!!
« Reply #2 on: October 18, 2002, 11:13:49 am »
I dont have my digital camera at home, but I will try and get some pics over the weekend and post them for you all.