Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: any1 run killer instinct 2 ok with sempron 2800+  (Read 1104 times)

0 Members and 1 Guest are viewing this topic.

tnanh

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 4
  • Last login:November 07, 2004, 11:58:50 pm
  • I'm a llama!
any1 run killer instinct 2 ok with sempron 2800+
« on: November 08, 2004, 12:11:44 am »
Just wanted to know if anyone have killer instinct 2 running on a sempron 2800+ ok? I am using a Sempron 2500+ and it's kind of slow, was thinking of upgrading to 2800+.  I also have an Intel 2.8, and it run KI2 pretty smooth, just wanted to know if 2800+ AMD works, if not, I'll just get another Intel and whimp a little.
Logged

SirPeale

  • Green Mountain Man
  • Global Moderator
  • Trade Count: (+23)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 12963
  • Last login:August 04, 2023, 09:51:57 am
  • Arcade Repair in New England
    • Arcade Game and Other Coin-Op Projects
Re:any1 run killer instinct 2 ok with sempron 2800+
« Reply #1 on: November 08, 2004, 12:46:22 am »
What's the rest of your setup like? Version of Mame?  Video card?  Operating system?

I've got WinXP with an Athlon XP 2400+ and I can run full frame, nearly 100% of the time.  Don't know why you'd be having problems, unless there's a bottleneck somewhere...
Logged

tnanh

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 4
  • Last login:November 07, 2004, 11:58:50 pm
  • I'm a llama!
Re:any1 run killer instinct 2 ok with sempron 2800+
« Reply #2 on: November 08, 2004, 12:53:45 am »
Quote from: Peale on November 08, 2004, 12:46:22 am
What's the rest of your setup like? Version of Mame?  Video card?  Operating system?

I've got WinXP with an Athlon XP 2400+ and I can run full frame, nearly 100% of the time.  Don't know why you'd be having problems, unless there's a bottleneck somewhere...



I'm running xp with an ATI 9200 128mg, 512 ram, mame88u1 with mamewah
Logged

Silver

  • Wiki Contributor
  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1668
  • Last login:April 16, 2025, 04:09:53 pm
  • Cunning like the Fox.
    • Mods'n'Mods
Re:any1 run killer instinct 2 ok with sempron 2800+
« Reply #3 on: November 08, 2004, 05:15:43 am »
Before upgrading have a play with some mame settings - check what resolution mame is choosing for ki2 etc... and maybe force a lower res, decrease accuaracy of sound emulation etc..etc... Often the sppedup gains outweigh any quality losses.....
Logged

wboy

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 176
  • Last login:November 03, 2005, 05:09:19 pm
  • I'm a llama!
Re:any1 run killer instinct 2 ok with sempron 2800+
« Reply #4 on: November 08, 2004, 06:07:57 am »
... and on the recommendation, I can tell you running KI2 thru the arcadevga at native res I could mostly get full frames on a Intel 2.4Ghz B chip, though when it did drop it would go to 55/60 frames for a few seconds.  On the 3.0Ghz B chip, its never dropped a frame.
Logged
Pages: [1]
  
Go Up
« previous next »