Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Mametrix CPO I am working on, what u think?  (Read 2109 times)

0 Members and 1 Guest are viewing this topic.

GodSin

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 75
  • Last login:September 30, 2014, 02:58:11 pm
  • I want my own arcade controls!
Mametrix CPO I am working on, what u think?
« on: October 02, 2004, 09:38:06 am »
Here is what I am working on for my Mametrix CPO and I was just wondering what people think of it so far ...

itismejs

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 229
  • Last login:February 29, 2012, 05:25:43 pm
Re:Mametrix CPO I am working on, what u think?
« Reply #1 on: October 02, 2004, 10:21:36 am »
pretty sure someone already did that...

DougHillman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 292
  • Last login:September 13, 2004, 07:39:18 pm
Re:Mametrix CPO I am working on, what u think?
« Reply #2 on: October 02, 2004, 10:33:34 am »
pretty sure someone already did that...

He didn't ask whether it was original or not.

Looks nice.

If you can't be a good example at least try to be a horrible reminder.

GodSin

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 75
  • Last login:September 30, 2014, 02:58:11 pm
  • I want my own arcade controls!
Re:Mametrix CPO I am working on, what u think?
« Reply #3 on: October 02, 2004, 10:44:16 am »
I know its already been done, but I am a fan of the series, heck you can even look way back to what I was considering for side art at one point too if you want :) not sure the link off hand though

here is my forth Revision of the CPO since I posted it which I think looks a little better, let me know again what you think

walls83

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • Last login:July 10, 2017, 02:58:45 pm
  • beer is good
Re:Mametrix CPO I am working on, what u think?
« Reply #4 on: October 02, 2004, 04:49:25 pm »
You know someone made a Matirix type thing that had game charaters falling and not that jibber jabber computer language.  You might want to try to find it and use it.

Its on the artwork board somewhere.

"A true warrior enters the arena with all his powers at the ready." ~ Gouki

wrxh8r

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 82
  • Last login:April 02, 2008, 11:30:49 pm
  • idiot extraudineer
Re:Mametrix CPO I am working on, what u think?
« Reply #5 on: October 02, 2004, 05:49:23 pm »
looks good
Would look even cooler (but expensive) with a layer of lit up laser etching
Your never alone with a rubber duck

Nannuu

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 992
  • Last login:May 23, 2022, 11:55:21 pm
  • Anytime now, I'll start my cabinet
    • Will and Liliana's Projects and Family Photos
Re:Mametrix CPO I am working on, what u think?
« Reply #6 on: October 02, 2004, 11:06:10 pm »
That looks good.

I assume you are also going to make a Mametrix marquee as well.  Please consider this idea as I've had it for a long time but am not a large enought fan of the Matrix to make my own.  You can get some 10 LED chaser boards and place them behind the marquee.  You would need 10 or more to make it cool looking.  Make the artwork so that some of the columns of symbols line up with each LED so it looks like they are moving down the marquee as the chasers light up.  You can also adjust the speeds of the lights with the kits so it would look super super cool.

To make it even better.  Blackout all but the Mametrix logo and the columns you want to light on the backside of the marquee .  Then place the LEDs, then mask over the LED sets so that only the LED lights show in the columns.  Then when you put your fluorescent lighting in the back just the logo lights up.  And the letters would look like they are moving down.

Oh yeah, that would be a sweet marquee.
Next I'll be on fries, and that's when the big money starts rolling in.

GodSin

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 75
  • Last login:September 30, 2014, 02:58:11 pm
  • I want my own arcade controls!
Re:Mametrix CPO I am working on, what u think?
« Reply #7 on: October 03, 2004, 06:16:17 am »
This is a link to what my Marquee Looks like with just a forescent light in the back... I will see about getting that LED Chaser thing as that would be sweet :)

http://www.arcadecontrols.com/files/Uploads/mametrix_marquee2.jpg

Robopede

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 61
  • Last login:October 18, 2004, 11:24:52 pm
  • 80's rule!
Re:Mametrix CPO I am working on, what u think?
« Reply #8 on: October 05, 2004, 02:56:29 am »
The CPO looks fantastic - I especially like how you angled the design around the front of the panel. Good job!

Regards,
Dave
Look inside and you will see
The dream is my reality