Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: almost there but need help :(  (Read 978 times)

0 Members and 1 Guest are viewing this topic.

Alcohol

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 48
  • Last login:February 15, 2021, 01:11:35 pm
  • I see dead People!!
almost there but need help :(
« on: September 29, 2004, 06:40:36 pm »
Hi..

ive had my cab for a while now running on a tv out card to a goodmans 2024 rs 21" tv, but the card was on its way out so ive decided to bite the bullet and get an arcade vga card..

ok so far all is good, ive made and soldered up the scart cable and the picture is stunning.. but as half expected(hoping it was going to be ok) ive got an overscan problem

unfortunately i cant find info on how to adjust it or even get into the sevice menu.. even if i got into the service menu iam not sure i would know what to do, so if theres anybody who knows anything about these tv's or can point me in the right direction i would be very greatfull

the tv is a goodmans 2025rs and i think it runs on a cp375 chasis but i am not sure

thanks geoff.....

neilcor

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 8
  • Last login:December 09, 2004, 07:00:28 am
  • I want to build my own arcade controls!
Re: almost there but need help :(
« Reply #1 on: December 05, 2004, 06:00:25 am »
Hi,

Would you be able to post your pin setup on your cable, I.e which vga pin to which scart pin you are using.  I'm having problems just getting a picture!