Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Can I repair my Actlabs Light Gun?  (Read 1870 times)

0 Members and 1 Guest are viewing this topic.

Demon-Seed

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1521
  • Last login:April 04, 2022, 09:51:02 am
    • DemonCade (WORKING URL!)
Can I repair my Actlabs Light Gun?
« on: August 03, 2004, 08:01:11 pm »
Guys today I put on my vinyl and when cutting the coin door I cut one of my Actlab wires!! it is the wire that goes from the black box to the gun. Think I can re attach the wires? looks like they are all color coated inside
Logged
Life is like a video game, a good one never dies..

PixelCloud

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 95
  • Last login:April 26, 2005, 07:15:14 pm
  • I'm a llama!
Re:Can I repair my Actlabs Light Gun?
« Reply #1 on: August 03, 2004, 08:04:44 pm »
solder + heat shrink = win
Logged

Demon-Seed

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1521
  • Last login:April 04, 2022, 09:51:02 am
    • DemonCade (WORKING URL!)
Re:Can I repair my Actlabs Light Gun?
« Reply #2 on: August 03, 2004, 08:07:54 pm »
Hey
I understand how to solder.... but heat shrink? whats that?

thx
JIM
Logged
Life is like a video game, a good one never dies..

NoOne=NBA=

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2718
  • Last login:July 23, 2011, 08:59:16 am
  • Just Say No To Taito! -Nichibutsu
Re:Can I repair my Actlabs Light Gun?
« Reply #3 on: August 03, 2004, 08:42:27 pm »
It's tubing that shrinks when you apply heat.
It comes in different sizes, so you can put small pieces over the individual wires, and a larger piece over the whole wire.

You need to slip it onto the wires, then solder them, then heat up the shrink tubing, and it will form to the wire.
Logged
Pages: [1]
  
Go Up
« previous next »