Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: help with artwork  (Read 1262 times)

0 Members and 1 Guest are viewing this topic.

justinf951

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 8
  • Last login:May 22, 2008, 08:51:55 pm
help with artwork
« on: July 24, 2004, 10:24:44 am »
I am nearing completion of my arcade cabinet, unfortunatly my artistic abilities are not up to par with my ability to construct a cabinet.  I am painting my cabinet "Ace of Spades" black with chrome T- Molding.  The paint is the inspiration for the name of the cab.  I am planning on calling the cabinet "The Ace of Spades."  However I need a marque and some side art.  I am just looking for something simple not too complex.  If anyone can help I would be very grateful.  Thanks.
Logged

walls83

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • Last login:July 10, 2017, 02:58:45 pm
  • beer is good
Re:help with artwork
« Reply #1 on: July 24, 2004, 02:25:39 pm »
Logged
"A true warrior enters the arena with all his powers at the ready." ~ Gouki

justinf951

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 8
  • Last login:May 22, 2008, 08:51:55 pm
Re:help with artwork
« Reply #2 on: July 24, 2004, 02:30:40 pm »
That is some nice artwork but I am looking for something a little simpler.
Logged

walls83

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • Last login:July 10, 2017, 02:58:45 pm
  • beer is good
Re:help with artwork
« Reply #3 on: July 24, 2004, 02:47:35 pm »
what are the sizes you need?
Logged
"A true warrior enters the arena with all his powers at the ready." ~ Gouki

justinf951

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 8
  • Last login:May 22, 2008, 08:51:55 pm
Re:help with artwork
« Reply #4 on: July 24, 2004, 03:18:52 pm »
The marque is about 26" by 5.5"
And the side art should be no bigger than 21" by 30"
I plan on buying a couple packs of playing cards and glueing the ace of spades cards onto the cp and bezel and I might throw a few on the sides as well.  Thanks
Logged
Pages: [1]
  
Go Up
« previous next »