Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: 3/4 tmolding ?  (Read 1383 times)

0 Members and 1 Guest are viewing this topic.

krion

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 131
  • Last login:January 13, 2021, 01:18:20 pm
  • I'm a llama!
3/4 tmolding ?
« on: July 23, 2004, 01:37:55 pm »
Just finished a new CP for my cab.  I made it out of 5/8 MDF.  Just wondering if I could use 3/4 tmolding on it, or will it overlap too much?  Thanks for your input :)

Krion
Logged

SirPeale

  • Green Mountain Man
  • Global Moderator
  • Trade Count: (+23)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 12963
  • Last login:August 04, 2023, 09:51:57 am
  • Arcade Repair in New England
    • Arcade Game and Other Coin-Op Projects
Re:3/4 tmolding ?
« Reply #1 on: July 23, 2004, 03:03:14 pm »
It'll overlap a whole bunch.  Get some 5/8" T molding.
Logged

pointdablame

  • I think Drew is behind this conspiracy...
  • Trade Count: (+7)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5034
  • Last login:August 28, 2025, 10:31:29 am
  • Saint and Woogie let me back in!
Re:3/4 tmolding ?
« Reply #2 on: July 23, 2004, 03:32:14 pm »
Yeah, get some 5/8" tmolding, or get yourself a 1/8" piece of plexi for over your CP.  Then the 3/4" will fit great.
Logged
Quote from: LoyalistRevolt on March 06, 2008, 04:48:08 pm
first off your and idiot

Man I love the internet, haha.

whammoed

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2312
  • Last login:December 18, 2025, 10:30:53 am
  • Crack don't smoke itself
    • NiceMite
Re:3/4 tmolding ?
« Reply #3 on: July 23, 2004, 03:47:32 pm »
I agree, get the right t-molding....but....
if you have to use it, cut the channel off center so all of the overhang is on the bottom, you may never even notice it this way.
Logged

krion

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 131
  • Last login:January 13, 2021, 01:18:20 pm
  • I'm a llama!
Re:3/4 tmolding ?
« Reply #4 on: July 23, 2004, 11:11:21 pm »
thanks for the replies.  Neglected to mention that I was probobly going to be putting plex ontop.  So I guess 1/8 plex, + 5/8 MDF = 3/4.  Makes me happy because I really had my heart set on some blue t-molding and they dont seem to make that in 5/8.  Anyhow, thanks again for the info :)

Krion
Logged
Pages: [1]
  
Go Up
« previous next »