Need power cord for arcade monitor

[jirovede]

I seem to have lost mine and was wondering where I could get a powercord for my arcade monitor. Do they differ for monitor to monitor? Or they all the same?
Thanks

[SirPeale]

If its an arcade monitor, you do NOT want to plug this into an outlet.  The monitor MUST have the power isolated via an isolation transformer.

[jirovede]

I thought not all monitors needed one? In that case I am not sure what I need then...

[JasonF]

What kind of monitor? It might have one built in...

[SirPeale]

Only a very few arcade monitors do *not* need one.  Either way, having one is cheap insurance.

[jirovede]

Well here is all the identifying writing I could find:
Zenith
OEM-011039

G-A63ADG25X
04RC0105-009

Model No. 25K7191
120V 60Hz 100W Max
Wells Gardner Electronics Co.

Any help appreciated

[SirPeale]

http://www.jstookey.com/arcade/WG_25k7191/

[jirovede]

Wow sweet, very informative. Thank you very much. If I have any Q's I'll post it in here. Thanks again.

*Edit: This helps me with the VGA cable hookup but not my power cord problem (unless I am missing something).

[Ken Layton]

If you mean the power cable in the game cabinet then here is what you need to buy to make your own:

1 Molex # 19-09-1029 White receptacle

2 Molex # 02-09-1101 Female pins

about 4 feet of 16 or 18 gauge zip cord to reach from the monitor to the isolation transformer.

1 # W-HT1919 Molex hand crimping tool for .093 pins

You have to fabricate the power cable as it's no longer available ready made from Wells-Gardner. That's why I provided the Molex numbers. I wonder if Bob Roberts could make this cable for you?