Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: 27" Monitor Mounting tips  (Read 1337 times)

0 Members and 1 Guest are viewing this topic.

Jakedakat

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 38
  • Last login:August 18, 2005, 08:40:06 pm
  • I'm a llama!
27" Monitor Mounting tips
« on: June 03, 2004, 01:19:20 pm »
Well I just recently purchased a Vision Pro 27" monitor, and I was just trying to figure out how I am gonna mount this thing in my cabinet! It's going to be going in an old Dynamo cabinet, I know it will fit. I made sure of that before I bought it :) But I was wondering if anyone had any tips, do's or don't do's, or problems they ran into while mounting large monitors. I am not the worlds greatest carpenter, but I can use power tools ;) I do have 2 different friends who are carpenters by trade who can help, so that should make my life somewhat easier. Thanks for any info.

Rob
Logged

Ghoward

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 449
  • Last login:July 09, 2021, 10:45:22 pm
  • Mame rocks!!
Re:27" Monitor Mounting tips
« Reply #1 on: June 03, 2004, 02:53:29 pm »
I made a monitor mounting boards for my two cabs I've made.

Get a sheet of 3/4 inch plywood cut a hole in it for the monitor tube and drill holes in it for the mounting brackets on the monitor.

Bolt the monitor to the board and then mount the board inside your cab.

Gary
Logged

bdsjake

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 336
  • Last login:September 18, 2017, 12:08:23 am
  • livefree
Re:27" Monitor Mounting tips
« Reply #2 on: June 03, 2004, 04:46:30 pm »
my D9200 sits on a shelf I installed, that takes most of the weight.  Then I bolted it to 2 2x4's, one on top, on on bottom of the front mounting brackets.  The 2x4's connect to sides of cab with "L" brackets.  very solid.
Logged
Pages: [1]
  
Go Up
« previous next »