Author Topic: Robotron 2084 (Read 8546 times)

Sparkolicious · « **on:** May 05, 2004, 03:45:08 pm »

I found this in the trash not too far from my house... It's in such good shape that I think I want to restore it.. All the boards are present and "Appeaer" to be in good shape... When I plugged it in the fans are the only thing working... My question is where do i start??!!

Sparkolicious · « **Reply #1 on:** May 05, 2004, 03:46:16 pm »

side view...

GGKoul · « **Reply #2 on:** May 05, 2004, 03:49:19 pm »

You found that in the trash!! Where do you live? As there maybe someone in the area that may be able to help you.

-GGKoul

Sparkolicious · « **Reply #3 on:** May 05, 2004, 03:54:53 pm »

I live in Ruston and New Orleans Louisiana... I work as a flight instructor for Louisiana Tech University in Ruston, but the real home is in New Orleans.. A friend of mine suggested a post to this site my give me some ideas...

SirPeale · « **Reply #4 on:** May 05, 2004, 08:37:45 pm »

I'm sorry, this game is obviously too far gone. However, it's not a total loss, I'll take it off your hands for you.

RetroJames · « **Reply #5 on:** May 05, 2004, 09:20:54 pm »

First let me say I am SOOOOOOO jealous. You really really scored HUGE. Robotron is very sought after in case you did not know.

I would start by reading alot. Check out USENET groups as well and just locate a load of info if you are serious about restoring the machine (which you should be, dang what a great find)

Generally I would start by getting a hold of a Robotron manual with the wiring schematics. Alot depends on your electronics aptitude. You will need to really bone up if you are not already there.

Figure out what IS working and in good shape, then prioritize the rest. Wow you have alot of work ahead, but DANG what a find.

I too will take it off your hands if you feel overwhelmed

Good luck, can't wait to see how it goes.

Lance · « **Reply #6 on:** May 05, 2004, 11:05:43 pm »

two words:

multi williams

Violineb · « **Reply #7 on:** May 06, 2004, 01:54:18 am »

Is that THE Robotron? OMG, some idiot was throwing that out? I've only played a remake for PC but I loved it, if only I could play it the way it was meant to be played. With 2 sticks. Are they only 8 way sticks?

maraxle · « **Reply #8 on:** May 06, 2004, 07:24:35 am »

Quote from: Lance on May 05, 2004, 11:05:43 pm

two words:

multi williams

Two more words:

restore it

menace · « **Reply #9 on:** May 06, 2004, 07:43:59 am »

these guys are crazy--paint it yellow, put a four player control panel extension on the front--juice it up with some lifters like they have on the low-riding cars, put in a kicking bass and play some console games on that badboy

ummm or you could just restore it i guess....your call

(and yes I am jealous in case you missed that

)

hunky_artist · « **Reply #10 on:** May 06, 2004, 08:53:02 am »

what's the diagonal screen size on that thing? I'm curious

thanks

SirPeale · « **Reply #11 on:** May 06, 2004, 09:42:07 am »

Quote from: hunky_artist on May 06, 2004, 08:53:02 am

what's the diagonal screen size on that thing? I'm curious

19"

SirPoonga · « **Reply #12 on:** May 06, 2004, 12:08:30 pm »

Is the monitor working?

The board for sure isn't working?

Klov has some info
http://www.klov.com/game_detail.php?letter=R&game_id=9347

Sparkolicious · « **Reply #13 on:** May 06, 2004, 01:25:47 pm »

not sure... haven't had any time to really check the thing out... Thanks for the link!

pathdoc2 · « **Reply #14 on:** May 07, 2004, 09:23:39 am »

Congrats. Great find. You will have an adventure restoring this fine machine.

tbombaci · « **Reply #15 on:** May 07, 2004, 09:34:04 am »

Quote from: Sparkolicious on May 05, 2004, 03:45:08 pm

I found this in the trash not too far from my house... It's in such good shape that I think I want to restore it.. All the boards are present and "Appeaer" to be in good shape... When I plugged it in the fans are the only thing working... My question is where do i start??!!

First, check the fuses in the power block.

If the fuses are good, how many LED's are lit on the power board? (The power board is the longer of the two bolted on the inside of the cabinet.

If all thre are lit, look on the ROM board (the smaller board with 15 - 17 eproms), there is a single LED display. It may be flashing a code "1", "4", "3" or smething like that. This code will give you a general idea if something is wrong.

Do you hear the "whining" sound of the monitor on power up? Is there static to the touch on the glass?

Check the "Screen" (brightness) pot on the monitor. BE CAREFUL!!! It is near the flyback transformer. A shock from that puppy will really ruin your day!! Be sure the pot is not turned all the way down.

Hope this helps.

-Tom

Matt, GoC · « **Reply #16 on:** May 08, 2004, 01:47:26 am »

Quote from: tbombaci on May 07, 2004, 09:34:04 am

Check the "Screen" (brightness) pot on the monitor. BE CAREFUL!!! It is near the flyback transformer. A shock from that puppy will really ruin your day!! Be sure the pot is not turned all the way down.

Basically, don't touch ANYTHING but those little dials (Pot = potentameter = little dial), or you may end up 6 feet under (seriously)!!!

hunky_artist · « **Reply #17 on:** May 08, 2004, 06:15:28 am »

Quote from: Peale on May 06, 2004, 09:42:07 am

Quote from: hunky_artist on May 06, 2004, 08:53:02 am
what's the diagonal screen size on that thing? I'm curious

19"

Thanks

instantwater006 · « **Reply #18 on:** May 20, 2004, 06:57:34 am »

If you decide that the restoration is too big a job for you and that you want to sell it instead (probably won't happen, but just in case) I would be willing to buy it off you for a very good amount of money. Otherwise, good luck. I'm very jealous of you for finding such a great machine

Magnet_Eye · « **Reply #19 on:** May 20, 2004, 08:25:01 am »

oh man. in the TRASH? I can't believe it. WTH!?

Sparkolicious · « **Reply #20 on:** June 23, 2004, 05:43:01 pm »

Ok so here's the deal. I replaced 8 fuses, and replaced the power cord.. plug it in and i get 3 led's on the smaller board inside the case to light... the monitor powers up and flashes then goes black... I am a complete n00b, but I don't see any other led's.... My question is where do I go from here? How should I go about reconnecting the battery holder? (there's a picture of it) and what are the batteries for n e way? Here are some pics of the boards...

Sparkolicious · « **Reply #21 on:** June 23, 2004, 05:43:30 pm »

.......

Sparkolicious · « **Reply #22 on:** June 23, 2004, 05:44:38 pm »

new janky PINK power cord 8^)

Sparkolicious · « **Reply #23 on:** June 23, 2004, 05:46:13 pm »

battery thingy...

Sparkolicious · « **Reply #24 on:** June 23, 2004, 05:49:14 pm »

Thanks for the help so far. I really wanna get this thing runnin again. Anyone with skillz live in the greater New Orleans area?

tbombaci · « **Reply #25 on:** June 23, 2004, 06:31:02 pm »

Doesnt need the batteries to boot.. Do you see any numbers flashing on the ROM board? There is a single LED display on the board.

-tom

AlanS17 · « **Reply #26 on:** June 23, 2004, 07:34:30 pm »

And it's in good cosmetic condition... Someone was stupid...

Sparkolicious · « **Reply #27 on:** June 23, 2004, 08:46:38 pm »

man I'm tellin ya I looked ALL over that board for a single led and can't find one anywhere! I'm gonna head back to the lab and fire it up again and see..

tbombaci · « **Reply #28 on:** June 23, 2004, 08:55:29 pm »

LED display:

check it out:

SirPeale · « **Reply #29 on:** June 23, 2004, 09:01:04 pm »

I bet he was looking for a single LED. I would have too.

Sparkolicious · « **Reply #30 on:** June 23, 2004, 09:27:21 pm »

damn it... i was just about to post!! lmao! I turned the lights off and figured it out... doh! It does the same thing the monitor does .. comes on for a sec then goes off.. theres a switch toward the top of the cab that needs to be depressed for the boards to get power... when i press it and hold it the power comes on then goes off...er well the monitor and the led flashes.. might try changing that switch... should be able to bypass it ya think?

tbombaci · « **Reply #31 on:** June 23, 2004, 09:38:19 pm »

Does the power stay on? You should be able to hear the monitor hum.

If all three LED's are lit on the power board and you do not get a flashing number sequence in the LED display, next step is to meter the power at each board. On the big board, the grey wires are +5v. Best bet is to pick up a schematic from the arcade ftp Here

Sparkolicious · « **Reply #32 on:** June 23, 2004, 11:59:13 pm »

the led's stay on... Now that I have these drawing I'll be able to poke arround a little more... Thanks a lot for the help! I'll post more when i get a chance to check it out!

JoeB · « **Reply #33 on:** June 24, 2004, 10:24:04 am »

Some cabs have safety switches that detect if the back is open, and kill the power. Tape down all these switches when working on the cab. But be very careful with what you touch.

If you don't know what you're doing, try to find someone local to you that can help you.

tbombaci · « **Reply #34 on:** June 24, 2004, 10:30:56 am »

Quote from: JoeB on June 24, 2004, 10:24:04 am

Some cabs have safety switches that detect if the back is open, and kill the power. Tape down all these switches...

No.

Pull the spring loaded pin out. No need to tape them down.

Sparkolicious · « **Reply #35 on:** June 24, 2004, 08:29:07 pm »

Ok.... the boards have power, and the monitor is staying powered up as well.. no led light.... It comes on for a second just like the monitor....

Floyd10 · « **Reply #36 on:** June 30, 2004, 10:00:39 pm »

screw you!

SirPeale · « **Reply #37 on:** June 30, 2004, 10:18:10 pm »

Quote from: Floyd10 on June 30, 2004, 10:00:39 pm

screw you!

What the heck is that all about?

Zeitgeist · « **Reply #38 on:** July 01, 2004, 10:06:40 am »

Great find Sparkolicious.
I found a PacMan cocktail that had been put to the street once over in Belle Chasse.
All I had to do was replace the power cord & send the board off for overhaul.
I'd suggest that you find someone who can go through the boardset for you & replacewhatever components that he finds bad.
This could run you about $100 - $150 but with the overall value of a Robotron machine, this is a small price to pay to get the thing working again.
My other suggestions is that you check back frequently at the place where you found your machine in the garbage, there may be more to follow...
BTW I live over in Thibodaux & work in New Orleans so if you ever need a little help or advice just drop me a line.
Take care
Z

pathdoc2 · « **Reply #39 on:** July 01, 2004, 11:32:56 am »

Doesn't Bob Roberts live in your neck of the woods? He may be able to help.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Robotron 2084 (Read 8546 times)

maraxle

Floyd10