Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Hantarex MTC9110 / 9000  (Read 1260 times)

0 Members and 1 Guest are viewing this topic.

bovril

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 4
  • Last login:April 28, 2004, 03:21:20 am
    • ninefortynine ltd
Hantarex MTC9110 / 9000
« on: April 27, 2004, 06:36:52 am »
Hey y'all. I recently purchased a couple of replacement monitors for some projects I am working on. One of the ones I bought was an Hantarex MTC9110, which as far as I can tell is identicle to an MTC9000 but with a fan attached.

My question concerns the power supply. I have the maual to go with it and it states that I need two inputs, 1 of 128Vac and one of 240V ac (Im in the UK).

Does anyone know what make / model of transformers were usually used with these monitors?

Any help would be greatly appreciated as I do not want to arse this up and have to replace the monitor as it was a pain to get it in the cab.

Many thanks,
Bovril.

bovril

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 4
  • Last login:April 28, 2004, 03:21:20 am
    • ninefortynine ltd
Re:Hantarex MTC9110 / 9000
« Reply #1 on: April 28, 2004, 03:23:40 am »
For those that are interested, the Hantarex US 250 or 300  power supplies are ideal.

I am quite dense. The 128Vac input can be +/-10% and the US250 has a 130Vac output. I actually had one of these hooked up to an MTC900 (yuck) in another cab.