Author Topic: Hacking a scart cable? (Read 2147 times)

jlampc · « **on:** March 25, 2004, 03:11:25 am »

Can I hack a Dreamcast scart cable to work with a 15khz arcade monitor? Someone gave me a free one for a dreamcast. Would it be better to buy a VGA box and mod that instead.
Advice.PLEEZE

Dave_K. · « **Reply #1 on:** March 26, 2004, 12:26:08 pm »

It would be much easier to just hack a VGA box (as per instructions in the Game Console FAQ on this site http://www.arcadecontrols.com/arcade_consoles.shtml).

You could also attempt to hack the SCART cable, but must be aware of several things. First there are two different types of SCART cable (euro and japanese)...need to figure out which you have, and then hack accordingly. Also depending upon your monitor, you will most likely need to split out the sync from the composite video signal and make an LM1881 circuit...again instructions in the faq, but here are two links for you:

http://www.gamesx.com/misctech/lm1881.html

http://www.mameworld.net/pc2jamma/arc_dc2.html


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Hacking a scart cable? (Read 2147 times)

jlampc

Hacking a scart cable?

Dave_K.

Re:Hacking a scart cable?