Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: K7191 problems  (Read 1000 times)

0 Members and 1 Guest are viewing this topic.

hankscorpio

  • Trade Count: (0)
  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • Last login:March 24, 2004, 10:39:50 pm
  • I'm a llama!
K7191 problems
« on: March 24, 2004, 10:42:46 pm »
I just bought a used WG K7191 monitor.  It stopped working after a couple of days so I did a cap kit.  It worked great after that...until today when I turned it on and smelled smoke.  Turns out that R301, the big white resistor on the side of the chassis burned up.  Are these problems related, or is it just my bad luck?
Logged

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re:K7191 problems
« Reply #1 on: March 25, 2004, 12:58:12 am »
When you did the capkit did you also check the board for bad solder joints? It's possible that the flyback transformer has blown and/or the horizontal output transistor has shorted. C36 or C69 (if present) might be shorted.
Logged
Pages: [1]
  
Go Up
« previous next »