Author Topic: Appcrash (Read 124 times)

killerinstinct · « **on:** March 13, 2018, 06:21:45 am »

When i want to play a game on my mame cab ill get this picture on my screen

Someone plz?

Thx

killerinstinct · « **Reply #1 on:** March 13, 2018, 06:21:51 am »

When i want to play a game on my mame cab ill get this picture on my screen

Someone plz?

Thx

killerinstinct · « **Reply #2 on:** March 13, 2018, 06:22:02 am »

When i want to play a game on my mame cab ill get this picture on my screen

Someone plz?

Thx

killerinstinct · « **Reply #3 on:** March 13, 2018, 06:22:11 am »

When i want to play a game on my mame cab ill get this picture on my screen

Someone plz?

Thx

Starglider · « **Reply #4 on:** March 14, 2018, 07:22:49 pm »

I know, let's convert the Commodore Music Maker into a sexy red thing with LED and potentiometers, then use it to record a brand new SID powered track!

(no ads)

Sent from my SM-N950U1 using Tapatalk

Starglider · « **Reply #5 on:** March 21, 2018, 02:07:25 am »

Everyone loves the Commodore 64 SID Chip, but it could be a little less noisy & buzzy couldn't it? There is a supposedly simple fix! But can I do it in 5 minutes?!?

My video contains no ads. Enjoy! Please also consider subscribing and supporting the channel.

Sent from my SM-N950U1 using Tapatalk

vaderag · « **Reply #6 on:** May 09, 2018, 03:00:40 pm »

Somewhat of a random question but is there anything I need to worry about if removing t-moulding from an MDF cab?

I've changed my mind on the colour but don't want to rip it out if it's going to widen the hole and make the new colour not stick...

Cheers

Sent from my Mi A1 using Tapatalk

vaderag · « **Reply #7 on:** May 09, 2018, 03:03:09 pm »

Somewhat of a random question but is there anything I need to worry about if removing t-moulding from an MDF cab?

I've changed my mind on the colour but don't want to rip it out if it's going to widen the hole and make the new colour not stick...

Cheers

Sent from my Mi A1 using Tapatalk

vaderag · « **Reply #8 on:** May 13, 2018, 04:01:19 pm »

I have a wiring harness (from Ultimarc if it matters), that connects into the ipac ultimate

However I don't quite have enough length to reach to the P1 joystick...

What's the best way to extend?
- is splicing the wire to make it longer going to lead to me getting latency or anything
- can I just cut and 'twist' in an extra bit of wire
- Is there an extension connector I can buy easily (I don't have a crimper etc)

Thanks

Sent from my Mi A1 using Tapatalk

vaderag · « **Reply #9 on:** June 03, 2018, 04:42:57 am »

I imagine this might exist somewhere, but sure am failing to find it...

I have LED buttons on my CP and my goal is to get the relevant buttons lighting up for each game in MAME

Is there an easy (ish) way to do this without going through every game independently??

Sent from my Mi A1 using Tapatalk

Nephasth · « **Reply #10 on:** July 12, 2018, 02:08:05 am »

First, draw it out in Sketchup...

Cut the wood...

Paint the pieces...

Screw 'em together...

Stand it all up...

Slap a dartboard on it and play!

Sent from my LM-G710VM using Tapatalk

Nephasth · « **Reply #11 on:** July 12, 2018, 02:08:15 am »

First, draw it out in Sketchup...

Cut the wood...

Paint the pieces...

Screw 'em together...

Stand it all up...

Slap a dartboard on it and play!

Sent from my LM-G710VM using Tapatalk

Nephasth · « **Reply #12 on:** July 12, 2018, 02:09:02 am »

First, draw it out in Sketchup...

Cut the wood...

Paint the pieces...

Screw 'em together...

Stand it all up...

Slap a dartboard on it and play!

Sent from my LM-G710VM using Tapatalk

Richie_jones · « **Reply #13 on:** August 19, 2018, 03:36:09 pm »

I'm in the UK.

I'd like to replace all my microswitches with something premium. I'm having some control issues with what I suspect are cheap switches.
If I'm taking my cp out which is a mammoth task I may as well just replace them all.

Can anybody recommend a premium switch. That's available in the UK...

Thanks

Richie_jones · « **Reply #14 on:** August 19, 2018, 03:36:16 pm »

I'm in the UK.

I'd like to replace all my microswitches with something premium. I'm having some control issues with what I suspect are cheap switches.
If I'm taking my cp out which is a mammoth task I may as well just replace them all.

Can anybody recommend a premium switch. That's available in the UK...

Thanks

Richie_jones · « **Reply #15 on:** August 19, 2018, 03:36:48 pm »

I'm in the UK.

I'd like to replace all my microswitches with something premium. I'm having some control issues with what I suspect are cheap switches.
If I'm taking my cp out which is a mammoth task I may as well just replace them all.

Can anybody recommend a premium switch. That's available in the UK...

Thanks

vaderag · « **Reply #16 on:** September 09, 2018, 11:07:58 am »

Playing SFII the other day and friend was playing as Guile and asked me the moves. Never used him so no clue... What's the easiest way to get moves lists available from pause / mame menus?

Using Hyperspin / Rocket Launcher and mame

Sent from my Mi A1 using Tapatalk

acvieluf · « **Reply #17 on:** September 16, 2018, 02:57:10 pm »

I've got this metal covering for The Deco cassette system, and I'm redoing the machine. I'd like to find a source for a new one of these. It feels like and extremely thin piece of aluminum. I looked through the usual websites (thisoldgame, game on grafix) and haven't found anyone that sells a Repro. Does anyone know where one might be located?

Sorry for the large image size, I'll fix it when I'm at my computer.

Sent from my Moto Z2 Play using Tapatalk

acvieluf · « **Reply #18 on:** September 16, 2018, 02:57:26 pm »

I've got this metal covering for The Deco cassette system, and I'm redoing the machine. I'd like to find a source for a new one of these. It feels like and extremely thin piece of aluminum. I looked through the usual websites (thisoldgame, game on grafix) and haven't found anyone that sells a Repro. Does anyone know where one might be located?

Sorry for the large image size, I'll fix it when I'm at my computer.

Sent from my Moto Z2 Play using Tapatalk

acvieluf · « **Reply #19 on:** September 16, 2018, 02:58:17 pm »

I've got this metal covering for The Deco cassette system, and I'm redoing the machine. I'd like to find a source for a new one of these. It feels like and extremely thin piece of aluminum. I looked through the usual websites (thisoldgame, game on grafix) and haven't found anyone that sells a Repro. Does anyone know where one might be located?

Sorry for the large image size, I'll fix it when I'm at my computer.

Sent from my Moto Z2 Play using Tapatalk

acvieluf · « **Reply #20 on:** September 16, 2018, 02:59:54 pm »

I've got this metal covering for The Deco cassette system, and I'm redoing the machine. I'd like to find a source for a new one of these. It feels like and extremely thin piece of aluminum. I looked through the usual websites (thisoldgame, game on grafix) and haven't found anyone that sells a Repro. Does anyone know where one might be located?

For some reason, my pictures aren't uploading. So here is a link to one I found on Google. I have the main body of the control panel, I'm just looking for that rectangular silver piece. The one I have on there now is quite corroded.

http://mamedb.blu-ferret.co.uk/cpanels/castfant.png

Sent from my Moto Z2 Play using Tapatalk

acvieluf · « **Reply #21 on:** September 16, 2018, 03:00:11 pm »

I've got this metal covering for The Deco cassette system, and I'm redoing the machine. I'd like to find a source for a new one of these. It feels like and extremely thin piece of aluminum. I looked through the usual websites (thisoldgame, game on grafix) and haven't found anyone that sells a Repro. Does anyone know where one might be located?

For some reason, my pictures aren't uploading. So here is a link to one I found on Google. I have the main body of the control panel, I'm just looking for that rectangular silver piece. The one I have on there now is quite corroded.

http://mamedb.blu-ferret.co.uk/cpanels/castfant.png

Sent from my Moto Z2 Play using Tapatalk

acvieluf · « **Reply #22 on:** September 16, 2018, 03:00:45 pm »

I've got this metal covering for The Deco cassette system, and I'm redoing the machine. I'd like to find a source for a new one of these. It feels like and extremely thin piece of aluminum. I looked through the usual websites (thisoldgame, game on grafix) and haven't found anyone that sells a Repro. Does anyone know where one might be located?

For some reason, my pictures aren't uploading. So here is a link to one I found on Google. I have the main body of the control panel, I'm just looking for that rectangular silver piece. The one I have on there now is quite corroded.

http://mamedb.blu-ferret.co.uk/cpanels/castfant.png

Sent from my Moto Z2 Play using Tapatalk

JRChristenson · « **Reply #23 on:** January 08, 2019, 06:04:33 pm »

I'm planning a small MAME project that will have three interchangeable control panels for different kinds of games. I'm looking for a simple way to attach and detach them to swap them out. Any thoughts?

Sent from my Pixel XL using Tapatalk

JRChristenson · « **Reply #24 on:** January 08, 2019, 06:04:42 pm »

I'm planning a small MAME project that will have three interchangeable control panels for different kinds of games. I'm looking for a simple way to attach and detach them to swap them out. Any thoughts?

Sent from my Pixel XL using Tapatalk

JRChristenson · « **Reply #25 on:** January 08, 2019, 06:05:58 pm »

I'm planning a small MAME project that will have three interchangeable control panels for different kinds of games. I'm looking for a simple way to attach and detach them to swap them out. Any thoughts?

Sent from my Pixel XL using Tapatalk

BadMouth · « **Reply #26 on:** February 16, 2019, 07:10:40 pm »

I was browsing the Tubi TV app and noticed that they have Starcade (arcade gameshow from the 80's).

I don't recall ever seeing it as a kid. Might be cool to have playing in your game room or workshop.

BadMouth · « **Reply #27 on:** February 16, 2019, 07:10:47 pm »

I was browsing the Tubi TV app and noticed that they have Starcade (arcade gameshow from the 80's).

I don't recall ever seeing it as a kid. Might be cool to have playing in your game room or workshop.

BadMouth · « **Reply #28 on:** February 16, 2019, 07:16:53 pm »

I was browsing the Tubi TV app and saw that they have Starcade, the arcade game show from the 80's.

I don't recall ever seeing it as a kid. I have seen some clips and seen it mentioned on BYOAC. Might be fun to have it playing in the game room or workshop.

BadMouth · « **Reply #29 on:** February 16, 2019, 07:17:01 pm »

I was browsing the Tubi TV app and saw that they have Starcade, the arcade game show from the 80's.

I don't recall ever seeing it as a kid. I have seen some clips and seen it mentioned on BYOAC. Might be fun to have it playing in the game room or workshop.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news