Author Topic: HELP! My monitor is FRIED (Read 1636 times)

Jabba · « **on:** March 05, 2004, 10:19:44 am »

If I could smack myself, I would

I installed an "UN-SHIELDED" 6" speakers in my cabinet under the marquee shelf. I didn't even know I had to worry if speakers were shielded or not! Well, to make a long story short, I turned on my monitor and there is a Pulply-Orangy defect on the left side of the monitor. Kinda like there was a magnet in front of that area of the screen. I hit the degause button like 20 times and nothing happened. I left the monitor alone for a couple of weeks and degaused again and still no luck

It is my 19" monitor. I will hate to have to toss this thing. Anyone have any ideas PLEASE???

Not sure, should I be posting this type of question in Monitor/Video section?

Thanks,

Garry

PacManFan · « **Reply #1 on:** March 05, 2004, 10:22:55 am »

Shield or move those speakers right away. Your monitor will be fine. Keep deguassing it. It may take a week for the color distortion to fade, but it will.

-PMF

Jabba · « **Reply #2 on:** March 05, 2004, 10:26:26 am »

Quote from: PacManFan on March 05, 2004, 10:22:55 am

Shield or move those speakers right away. Your monitor will be fine. Keep deguassing it. It may take a week for the color distortion to fade, but it will.

-PMF

Thanks PacManFan for the quick reply. They were moved (almost to the trash bin...) since. Its already been two weeks. Should I keep degausing (i.e., pressing the software degause button a few times every day until it goes away? Is this a factor of the number of times degaused or length of time? What is a Bob Roberts degause wand? Thanks

Edgedamage · « **Reply #3 on:** March 05, 2004, 10:31:43 am »

Tisk Tisk if you lived in toronto I could fix your monitor in 3sec I have a degauss wand.

Stingray · « **Reply #4 on:** March 05, 2004, 10:42:18 am »

This sounds like a job for a degauss wand. Since youseem to not have one you can always haul your monitor to a local TV repair place, they can do it for you.

-S

Edgedamage · « **Reply #5 on:** March 05, 2004, 10:46:00 am »

Also do the poor man's degauss wand use a corded drill.

Zakk · « **Reply #6 on:** March 05, 2004, 10:54:08 am »

Corded drill? Really? Now that's a neat trick if it works, how about a 24V cordless?

Jabba · « **Reply #7 on:** March 05, 2004, 11:00:12 am »

Quote from: Edgedamage on March 05, 2004, 10:46:00 am

Also do the poor man's degauss wand use a corded drill.

I have a corded drill. What exactly do I do with it (no jokes please...

)

Ken Layton · « **Reply #8 on:** March 05, 2004, 11:40:50 am »

Just buy the manual degauss coil that Bob Roberts sells. It is much more powerful than the internal one on the monitor.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: HELP! My monitor is FRIED (Read 1636 times)

Jabba

HELP! My monitor is FRIED

PacManFan

Re:HELP! My monitor is FRIED

Jabba

Re:HELP! My monitor is FRIED

Edgedamage

Re:HELP! My monitor is FRIED

Stingray

Re:HELP! My monitor is FRIED

Edgedamage

Re:HELP! My monitor is FRIED

Zakk

Re:HELP! My monitor is FRIED

Jabba

Re:HELP! My monitor is FRIED

Ken Layton

Re:HELP! My monitor is FRIED