Anode Cup - Loose or Tight?

[IronChef]

Just putting back together a monitor I took apart (for the first time) and am havnig truoble re-attaching the anode cup.

Now I wish I had my digital camera with me, but since I don't...

Just wondering how far the clip goes in and how tight it should be.  It's a pretty rigit clip and with some strength I can get the two little claw parts into the tube, but I am wondering if it is supposed to go in deeper... or is it the function of the suction cup to hold it in?

Thanks.

[Ken Layton]

The clips go under the edge of the hole to make the electrical connection and the suction cup holds things in place.

[IronChef]

Thanks for the info.

I took another looked at it, and it physically looked impossible for the clip to go in any further... without basically having to squeeze the clip with Superman like power.

[JoeB]

The clips are just that, clips to hold it in place.  The cup just keeps it sealed from other things from going in.

It shouldn't be as tight as a screw, at the same time it shouldn't be super loose..  It does have a small amount of play.

Hope this helps.