Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Golden Tee FOUR gurus I need some help.  (Read 2112 times)

0 Members and 1 Guest are viewing this topic.

Twistedgearhead

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 1
  • Last login:July 25, 2020, 10:14:56 pm
  • Tinkering is my game
Golden Tee FOUR gurus I need some help.
« on: July 25, 2020, 06:53:22 pm »
I have a golden tee four 2005 red board and ended up loosing a couple pads while replacing chips. Does anybody have schematics of the red board or can identify where these pads run?

U20 pin 3
U112 pin 11,17,33,34
U110 pin 11
U111 pin 17

U112/111/110 are ram chips and the data sheet is saying those pins are not connected so I may have lucked out there.
But U20 is part of the IDE interface and pin 3 has continuity to several places on the board (using diode mode) one way, so I know it runs somewhere. Its an internal trace so there is nothing to follow on the board.

Any help would be much appreciated!
Logged
Pages: [1]
  
Go Up
« previous next »