Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: vmmaker Add a modeline on display2 how?  (Read 1811 times)

0 Members and 1 Guest are viewing this topic.

xbrunox

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 152
  • Last login:Today at 12:30:15 pm
  • I want to build my own arcade controls!
vmmaker Add a modeline on display2 how?
« on: January 09, 2020, 10:03:41 am »
HI Calamity

i've a system with multimonitor an LCD and a 15KHZ CRT  my desktop is setting to extended end i can view what i want to my CRT with switchres.

now... How I can Add a modeline to display2 my crt and not on my display1?
if i add a modeline in vmmaker from a file wmmmaker add it to display1 my LCD not to my CRT.
in Arcade OSD too i view only modeline (resolution) of display1 not of display2... i Need to modify 2560x240 (my super resolution) and after that copy valours in my groovymame ini

thanks

Calamity

  • Moderator
  • Trade Count: (0)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 7463
  • Last login:July 19, 2025, 04:03:33 am
  • Quote me with care
Re: vmmaker Add a modeline on display2 how?
« Reply #1 on: January 09, 2020, 10:11:54 am »
In vmmaker->settings->video card, you have a device dropdown menu where you must point to the correct display for new modes.

In Arcade OSD, press "2" to send the window to the correct monitor, then press "attach osd to current monitor".
Important note: posts reporting GM issues without a log will be IGNORED.
Steps to create a log:
 - From command line, run: groovymame.exe -v romname >romname.txt
 - Attach resulting romname.txt file to your post, instead of pasting it.

CRT Emudriver, VMMaker & Arcade OSD downloads, documentation and discussion:  Eiusdemmodi

xbrunox

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 152
  • Last login:Today at 12:30:15 pm
  • I want to build my own arcade controls!
Re: vmmaker Add a modeline on display2 how?
« Reply #2 on: January 09, 2020, 10:37:18 am »
Thanks!