Ultimarc Aimtrak LightGun with MAMEUI32

[mr_mercury]

Hello All,

I have recently purchased an Ultimarc Aimtrak Lightgun.  I am having trouble getting it to work with MAMEUI32.  Version 0.154.

It works absolutely fine with my Model 2 emulator as it really does just emulate a mouse.  But this is not the case with Mame.

I have followed the steps the best I can by editing the ini file and setting the lightgun flag from 0 to 1 and the same with offscreen reload.  However when I go to general input it will detect movement or trigger clicks or anything.

Is anyone able to provide some advice please?

Thank You.

[Titchgamer]

I dont use Mame UI so may not be right but I dont think you have to do anything in the ini file but it does have a settings menu to enable light guns etc.
Maybe have a look in there?

[mr_mercury]

Hi Titchgamer,

I did go into the controller mapping tab, there is a lightgun option in there that by default was set to mouse.  However when I set this to lightgun, it still didn't seem to recognise it.

The odd thing is when I load up a rom and press tab to navigatet the menu, I scroll up and down using the light gun, its bizarre.

Maybe I should try and use MAME instead of MAMEUI but from my understanding it is complicated to set up.

[Titchgamer]

Just to clarify mame is not detecting the AT in the controller config menu is that correct?

The aim trak is detected as a mouse so have you tried setting lightgun as mouse?

[mr_mercury]

Yeah I did try that too with no joy.

[SlyBlueFox]

Hi Titchgamer,

I did go into the controller mapping tab, there is a lightgun option in there that by default was set to mouse.  However when I set this to lightgun, it still didn't seem to recognise it.

The odd thing is when I load up a rom and press tab to navigatet the menu, I scroll up and down using the light gun, its bizarre.

Maybe I should try and use MAME instead of MAMEUI but from my understanding it is complicated to set up.

If you have not already, go to the Ultimarc website & download the PDF AimTrak setup guide. It gives you step-by-step instructions for regular MAME & is not that difficult to setup (just follow the guide). If you still have any issues, we'll try to help.

[mr_mercury]

Hi all,

I managed to get this working.  I just downloaded a newer version of MAMEUI64FX. 

Thank you for your help.