Power Monitor On By Plugging It In

[portableanswers]

I am currently away and do not have access to my monitor model/serial number.

I found an old post regarding this issue but the user never replied how he hacked his monitor.

I need the monitor inside my arcade machine to turn on when it receives power (plugged in).

Right now I am using a remote control.

I understand that some monitors have a setting for this but I do not believe mine does.

I am guessing I need to wire the power button in some way.

Thank you in advance.

[DorkVonWaterfall]

if scart then 12v to pin 8

[portableanswers]

My apologies, could you elaborate please? I'm inexperienced. 

[PL1]

SCART is a standard European 21-pin connector for audio-visual equipment.




Scott

[buttersoft]

Was that even what he was asking? I thought he meant that when he powers on his monitor, it comes up in standby mode, so he has to use the remote to turn it on. Which problem I have no idea how to fix properly, and would suggest trying a timed relay on a standby switch, if there is one. You could wire it to the remote button, but that pretty much puts the remote out of use for other purposes.

[portableanswers]

Thank you both. Buttersoft, you are correct. That is what I was asking. I have to use the remote. I wonder if I could wire the power button to an external button.

[pbj]

Try jamming in the power switch with a toothpick.  Sometimes you get lucky and the TV will turn off and on with the plug after you've done that.

[portableanswers]

True. I have tested that method on this TV but it did not work. I should have mentioned that in my initial post. Thank you.

[obcd]

If you could generate the IR code that turns on the system, you could install the ir led close to the tvset and activate it for a couple of seconds at powerup. Maybe you could use the electronics of a universal remote for this. Some are pretty cheap.