Wg k7500 monitor adjustment

[mclovin]

I have a monitor chassis I just capped. Think it's a wgk7500 everything is good and clear, I would just like to make an adjustment as the monitor does not seem plumb for a lack of a better word. The picture needs a slight adjustment counter clockwise. I'm not sure what this adjustment is called, but is it possible to adjust the picture slightly clockwise or counter clockwise? Thanks

[grantspain]

do you mean the whole picture needs to  be slightly rotated to make it square -you would need to rotate the deflection yoke fractionally

[mclovin]

Yes exactly. I have not done that before, I'll give it a try. Thanks

[ed12]

and do it very very slow
or get ready to re converge

ed

[mclovin]

Ok I had a closer look and it is only the bottom part of the screen that is not running true, I also have a bit of a pincushion issue on the one side in order to get it perfect. I'll Attach a pic.

[grantspain]

do you have the small daughter board attached,it has a pincushion and traspezoid control

[Mike A]

+1. I had a similar issue. I called the guy I bought it from and he told me where the trapezoid adjustment was.
Mine is not a WG, otherwise I would post a pic of the location.

[mclovin]

do you have the small daughter board attached,it has a pincushion and traspezoid control

Yes, tried adjusting the pots and no real change that I could see.