Author Topic: New to hyperspin.. need help with old v1.3.1 (Read 1093 times)

Oniboi · « **on:** June 16, 2016, 03:45:23 pm »

So I'm a noob that currently started building a bartop. I got a pretty loaded sdd with hyperspin with emus, and only mame roms. I'm trying to figure out how to use a xin MO USB with my current setup. I have hyperspin v1.3.1, hyperhq 1.3, and hyperlaunch reads file v3.0.0.9/product v1.1.9.4! How can I setup my xin MO with my current versionversions? I have autojoykey,xpladder, and joytokey. Should I just upload the newest version on everything and will it cause me to lose all current files?

lamprey · « **Reply #1 on:** June 20, 2016, 01:17:26 pm »

I don't know much about the Xin Mo, but I think it is a joystick controller. Hyperspin 1.3 doesn't see joysticks, so you can't use it directly. You might try the latest version and see if that'll see the Xin Mo.

Otherwise, you might be able to do a mapping with xpadder or joytokey.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: New to hyperspin.. need help with old v1.3.1 (Read 1093 times)

Oniboi

New to hyperspin.. need help with old v1.3.1

lamprey

Re: New to hyperspin.. need help with old v1.3.1