Author Topic: [Telco KT-1403V] No picture (Read 1874 times)

JeanMix · « **on:** March 28, 2016, 08:18:06 am »

Hello,
I have my Merit Type 51 with KT-1403V chassis monitor that have a problem :
- No picture with VGA Signal Cable connect and disconnect
- Nothing on the screen when i try to adjust the G2 on the Flyback
- Light up fine on the end of the tube/neckboard

I have try to download the Ken Layton repair guide but the link is dead.

Thanks by advance.

Best regards.

Ken Layton · « **Reply #1 on:** October 16, 2016, 01:38:58 am »

Sorry for the late reply.

All of my repair guides are now located here:

https://sites.google.com/site/mtpacifico/kens_korner

The KT-1403V guide:

https://docs.google.com/viewer?a=v&pid=sites&srcid=ZGVmYXVsdGRvbWFpbnxtdHBhY2lmaWNvfGd4OjQ0NTg4Yjc2MGZiZWRhOTk


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: [Telco KT-1403V] No picture (Read 1874 times)

JeanMix

[Telco KT-1403V] No picture

Ken Layton

Re: [Telco KT-1403V] No picture