Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: CRUSIN WORLD GAME BOARD  (Read 974 times)

0 Members and 1 Guest are viewing this topic.

Sarmstrong60

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19
  • Last login:October 30, 2015, 05:25:58 pm
  • I want to build my own arcade controls!
CRUSIN WORLD GAME BOARD
« on: October 28, 2015, 12:20:02 pm »
I thought I had a monitor issue with a weak blue color, but when I swapped out my game board the problem went away. So now I have a Crusin World game board with a weak blue video signal. I am clueless where to begin. Thanks in advance for the help Steve.

lilshawn

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7513
  • Last login:Yesterday at 04:01:19 pm
  • I break stuff...then fix it...sometimes
Re: CRUSIN WORLD GAME BOARD
« Reply #1 on: October 28, 2015, 12:57:13 pm »
it was quite common with those boards. sometimes scrubbing the contacts on the JAMMA connector with a pencil eraser would help.

Sarmstrong60

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19
  • Last login:October 30, 2015, 05:25:58 pm
  • I want to build my own arcade controls!
Re: CRUSIN WORLD GAME BOARD
« Reply #2 on: October 30, 2015, 04:53:18 pm »
I cleaned the edge connector of the board with an eraser, used contact cleaner on the connector and checked for contact through the connector to the monitor with my meter.