Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Dynamo Cut-Corner Template  (Read 3185 times)

0 Members and 1 Guest are viewing this topic.

BAMBOO

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 290
  • Last login:June 30, 2016, 06:51:20 am
Dynamo Cut-Corner Template
« on: October 23, 2015, 10:18:58 am »
Made this a little while back, hope someone can use it.  I believe it is the HS-5, cause that is what I have and I took all the measurements from my CPO.  300 dpi.  ;)
Download: http://www.mediafire.com/download/o62k463grilov38/DYNAMO-CORNER-CUT-CORNER-HS5-CPO-2TEMPLATE.png


« Last Edit: October 23, 2015, 12:00:55 pm by BAMBOO »
"Every arcade we restore preserves history that we will never experience again..."

harveybirdman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2540
  • Last login:December 28, 2024, 01:21:59 am
  • SHMUP'EM
Re: Dynamo Cut-Corner Template
« Reply #1 on: October 23, 2015, 10:25:15 am »
Pretty sure that Dynamo's and my 3KOAM panels are different dimensions, but I'm going to take a look at this anyway.

Thanks.

BAMBOO

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 290
  • Last login:June 30, 2016, 06:51:20 am
Re: Dynamo Cut-Corner Template
« Reply #2 on: October 23, 2015, 10:32:25 am »
Pretty sure that Dynamo's and my 3KOAM panels are different dimensions, but I'm going to take a look at this anyway.

Thanks.

I can go back and list the measurements then repost.  Might take me a little while cause I'm so busy at the moment but I should have included them.
"Every arcade we restore preserves history that we will never experience again..."

BAMBOO

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 290
  • Last login:June 30, 2016, 06:51:20 am
Re: Dynamo Cut-Corner Template
« Reply #3 on: October 23, 2015, 12:01:24 pm »
"Every arcade we restore preserves history that we will never experience again..."

harveybirdman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2540
  • Last login:December 28, 2024, 01:21:59 am
  • SHMUP'EM
Re: Dynamo Cut-Corner Template
« Reply #4 on: October 23, 2015, 12:15:23 pm »
Thanks, that's actually pretty close to mine, I'll have to measure when I get home.

BAMBOO

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 290
  • Last login:June 30, 2016, 06:51:20 am
Re: Dynamo Cut-Corner Template
« Reply #5 on: October 23, 2015, 01:35:31 pm »
Yep....   ;)
"Every arcade we restore preserves history that we will never experience again..."

opt2not

  • Trade Count: (+15)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6173
  • Last login:April 02, 2024, 07:42:30 pm
Re: Dynamo Cut-Corner Template
« Reply #6 on: October 23, 2015, 04:55:17 pm »
Coooooool. thanks for this, might come in handy.  :cheers:

BAMBOO

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 290
  • Last login:June 30, 2016, 06:51:20 am
Re: Dynamo Cut-Corner Template
« Reply #7 on: October 23, 2015, 06:00:44 pm »
Yep, wish I would have posted it sooner.  Just needed a break from my arcade hobby for a while.  You guys think I should measure the cab itself or has that already been done?  I read somewhere last year a whole thread about the Dynamo cab dimensions.... or lack of...
"Every arcade we restore preserves history that we will never experience again..."