Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Help with 15hz to TV  (Read 940 times)

0 Members and 1 Guest are viewing this topic.

Nataq

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 189
  • Last login:October 21, 2023, 09:09:45 am
  • Arcade of the dead... now alive!
    • Arcade of the dead... now alive!
Help with 15hz to TV
« on: October 18, 2015, 11:03:45 pm »
Finished my cabinet 5 years ago and will update the PC soon. Litterally spent 2 hours searching tonight at how to get 15k on my TV to a waste and need help.

Can't believe the soft15 stuff that is sticked to this page is so old and not updated. Anyway...

What do I need to get 15k to my TV if it is equiped with component inputs? Can I get this without special/moded cable ? I have no scart since i'm in Canada.

Is CRT_Emudriver the way to go now ? With GroovyMame ? Do I still need a special cable for this ?

Ideally, I'd want to output from a card in component format to the component inputs of my TV directly. Is that possible ?

I am totally lost ! Thanks for your help !

mrcram

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 187
  • Last login:October 07, 2016, 05:47:03 am
  • OREGON STATE
Re: Help with 15hz to TV
« Reply #1 on: October 21, 2015, 12:35:01 am »
Does your tv have svideo input? Why not go that route instead. Svideo cards like a Radeon x2400 or 1300 are super cheap. Video is look fantastic.