Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: WG K7000 update!!!  (Read 939 times)

0 Members and 1 Guest are viewing this topic.

Joselv81

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 7
  • Last login:November 10, 2015, 10:20:02 pm
  • I want to build my own arcade controls!
WG K7000 update!!!
« on: October 04, 2015, 03:43:56 am »
Well first off great to be a part of the community. Well it has been a rough week, just got a cabinet that included x-arcade joystick and buttons thats good I guess. Had some troublw getting the connections right but finally got it. Now my issue is that I setup a vga cable to my monitor after using a jamma adapter and had issues with the monitor I was thinking that was the problem. Turns out it wasn't the monitor would not hold sync all the time. I tried changing it to vga it works better i would say but now the issue is that I see three of my drsktops and they all look terrible. I am thinking it might be a horizontal issue but don't want to mess with it too much as I am not very experienced. If anyone had had this issue and got it fixed or has any input please let me know,  I am to the point of taking the darn thing out and putting in a lcd but that might be too small.  TIA

Update: Well I think I have the 15khz installed correctly now I had two displays and then boom back to three so I know I am doing something right. Here are some of  my specs of anyone can help I am running a Nvidia g210 with Windows 7 x64 have soft15khz but at times gives me a runtime error 13 I've tried arcadeosd but to no avail cant seem to understand Powerstrip either. Really any help would be appreciated thanks again.
« Last Edit: October 06, 2015, 11:07:24 pm by Joselv81 »

SailorSat

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1239
  • Last login:Today at 05:37:34 pm
    • For Amusement Only e.V.
Re: WG K7000
« Reply #1 on: October 05, 2015, 02:31:29 am »
You DO feed it with a 15kHz Signal? - It won't work with a plain VGA Signal.
I do all that stuff even without a Joystick ;)
Soft-15kHz, cabMAME, For Amusement Only e.V.


Joselv81

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 7
  • Last login:November 10, 2015, 10:20:02 pm
  • I want to build my own arcade controls!
Re: WG K7000
« Reply #2 on: October 05, 2015, 04:57:39 am »
Well i am trying to setup powerstrip and soft15k but soft gives me runtime error 13 and powestrip can really get into it ahould i try and install a second monitor first?