Author Topic: Boot problem after hdd install (Read 1559 times)

axys · « **on:** August 27, 2015, 06:20:22 am »

Hello,

I'm trying to install GroovyArcade-Arch2015.02.15-x86_64, from an usb key, following this tutorial: https://code.google.com/p/groovyarcade/wiki/GroovyArcade_Install_Config_Guide.
During the install, I delete all partitions of the hdd, then auto install.

The problem is that after the reboot, the pc won't boot: "Insert valid boot drive..."

I suspect an UEFI problem (legacy/UEFI is enabled (instead of UEFI)). I have installed a Debian distribution without problem.

Any idea about this problem ?

Sorry about my bad English

axys · « **Reply #1 on:** August 28, 2015, 12:21:05 pm »

After many tries, the problem is the motherboard. The UEFI is very bugged.
I found an USB key compatible with the board. Auto install works well with it.

Thanks for the distrib.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Boot problem after hdd install (Read 1559 times)

axys

Boot problem after hdd install

axys

Re: Boot problem after hdd install