Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Daytona USA Graphics Issue  (Read 1902 times)

0 Members and 1 Guest are viewing this topic.

at1105

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 7
  • Last login:July 17, 2023, 11:22:07 pm
  • I want to build my own arcade controls!
Daytona USA Graphics Issue
« on: August 11, 2015, 12:09:35 am »
I just bought a Daytona USA with a Wells Gardner u5000. Was told the monitor was dead. When I fired it up I wasn't getting any high voltage sounds and had a black screen. Tested B+ and it was over 200v. Found a couple of bad resistors. Replaced them and recapped it. Fired it up and it came to life but picture didn't look right. I could see it playing but it had some weird type of interference and the color looked odd. Any ideas of what the issue might be?
Logged
Pages: [1]
  
Go Up
« previous next »