Author Topic: NeoGeo MVS Arcade Monitor Power to ATX (Read 1250 times)

MVSGuy · « **on:** April 03, 2015, 10:38:32 am »

Hello,

We replaced the PCB with a motherboard and ATX power, using a Jamma connector and 15hz software.. Everything is working well.

Issue we have is the monitor is still powered by the original cabinets power supply that is dying.

How can I connect the Arcade monitors power to the ATX powers supply? Anyone have some photos of this or details ?

Any help to point us in the correct direction will be greatly appreciated.

I will tip anyone that can provide photos and details of how they connected it and we are able to replicate.

Thanks!

Ken Layton · « **Reply #1 on:** April 03, 2015, 12:34:18 pm »

First be sure to look to see if your existing monitor needs an isolation transformer. If it does, then that transformer will still need to be connected and powering the monitor only.

grantspain · « **Reply #2 on:** April 03, 2015, 07:53:32 pm »

bit more info-like model/make of monitor would help and why you think the supply is faulty
my guess is you have a hantarex mtc9000 series running from a u250 power supply


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: NeoGeo MVS Arcade Monitor Power to ATX (Read 1250 times)

MVSGuy

NeoGeo MVS Arcade Monitor Power to ATX

Ken Layton

Re: NeoGeo MVS Arcade Monitor Power to ATX

grantspain

Re: NeoGeo MVS Arcade Monitor Power to ATX