Author Topic: . (Read 5216 times)

yotsuya · « **Reply #1 on:** February 25, 2015, 12:25:07 am »

Use a pair of needle nose pliers or, if you have enough room, vice grips, to hold the bolt still.

ChanceKJ · « **Reply #2 on:** February 25, 2015, 12:34:05 am »

yotsuya · « **Reply #3 on:** February 25, 2015, 12:37:40 am »

Nope. Tried it on one and DESTROYED the bolt head.

Well, I've Dremeled off bolts before and gotten replacements from the hardware store. Do what you need to do.

ChanceKJ · « **Reply #4 on:** February 25, 2015, 12:39:24 am »

.Yikes! What about solvents? Anything that would destroy the locktite, but not damage the plastic joystick risers?

yotsuya · « **Reply #5 on:** February 25, 2015, 12:42:04 am »

Wow. Well, I haven't had that issue specifically (I've torn down a Vs Panel). Wish I could help!

ChanceKJ · « **Reply #6 on:** February 25, 2015, 01:58:31 am »


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news