Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: U360 spring change  (Read 967 times)

0 Members and 2 Guests are viewing this topic.

Blueic5

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 92
  • Last login:December 16, 2018, 05:31:20 pm
  • I want to build my own arcade controls!
U360 spring change
« on: January 16, 2015, 12:06:39 pm »
Hi

I was trying to change the spring on my u360 and watched a dismantling video on youtube but his magnet just seems to pop off where as mine is fixed on somehow .  So now im a little stumped just wondering if ive missed something ?
Logged

EMDB

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 865
  • Last login:September 05, 2023, 09:18:51 am
  • Project RetroCade
Re: U360 spring change
« Reply #1 on: January 16, 2015, 12:13:25 pm »
Quote from: Blueic5 on January 16, 2015, 12:06:39 pm
Hi

I was trying to change the spring on my u360 and watched a dismantling video on youtube but his magnet just seems to pop off where as mine is fixed on somehow .  So now im a little stumped just wondering if ive missed something ?
Use some force. It is quite firmly stuck...
Logged

DietCoke

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 110
  • Last login:October 10, 2020, 08:32:13 pm
Re: U360 spring change
« Reply #2 on: January 16, 2015, 12:15:28 pm »
You might need to twist or rock it a little bit.  Be careful though to ensure that you don't create burrs when you're twisting it.
Logged

Nephasth

  • Guest
  • Trade Count: (0)
Re: U360 spring change
« Reply #3 on: January 16, 2015, 12:34:00 pm »
Don't forget to lube your pivot with plumber's silicone grease while you have it dismantled.
Logged

ChanceKJ

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3229
  • Last login:August 07, 2021, 02:52:06 pm
Re: U360 spring change
« Reply #4 on: January 16, 2015, 02:02:39 pm »
Also, when putting it back on make sure it's seated properly and square.  I did some work on mine and noticed these same things.
Logged

Blueic5

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 92
  • Last login:December 16, 2018, 05:31:20 pm
  • I want to build my own arcade controls!
Re: U360 spring change
« Reply #5 on: January 16, 2015, 02:35:40 pm »
I'll have another look,  but was frightened of breaking it,  as that magnet wasn't shifting...
Logged
Pages: [1]
  
Go Up
« previous next »