Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: WG 7203  (Read 1093 times)

0 Members and 1 Guest are viewing this topic.

kardenm

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 181
  • Last login:June 13, 2019, 09:14:35 am
WG 7203
« on: October 29, 2014, 10:17:49 am »
Need some suggestions. 

I have two WG 19K7203 monitors Which work fine except they will not turn on the first time I apply power (I can hear HV but no picture).
The picture always comes up when I turn the power off and back on again.

I have already checked several capacitors but no luck yet.
Any suggestions on where to start looking would be greatly appreciated!
Logged
In theory, there is no difference between theory and practice, but in practice.....there is!!

Sarver Systems

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 937
  • Last login:October 07, 2020, 12:46:05 am
Re: WG 7203
« Reply #1 on: October 30, 2014, 10:29:35 am »
This is exactly the signs of a cap going bad.

Instead of just "checking a few", just "replace them all" and be done with.
Logged

kardenm

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 181
  • Last login:June 13, 2019, 09:14:35 am
Re: WG 7203
« Reply #2 on: October 30, 2014, 10:58:39 am »
Thanks, but... 
That's A LOT of caps (x2).  If I could narrow it down to a particular section that would be most helpful!
Logged
In theory, there is no difference between theory and practice, but in practice.....there is!!

Sarver Systems

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 937
  • Last login:October 07, 2020, 12:46:05 am
Re: WG 7203
« Reply #3 on: October 30, 2014, 11:24:36 am »
Order from mouser, get them cheaper than buying kits.

Take your time, no need to rush through it.
Logged
Pages: [1]
  
Go Up
« previous next »