Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: WG K7400 voltage questions  (Read 2212 times)

0 Members and 1 Guest are viewing this topic.

Sarver Systems

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 937
  • Last login:October 07, 2020, 12:46:05 am
WG K7400 voltage questions
« on: October 28, 2014, 10:34:27 pm »
I'm working on yet another WG chassis.

This time a K7401.

If my research is correct, I should be getting 117VDC, but I don't know where to pull the voltage from.
Logged

kardenm

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 181
  • Last login:June 13, 2019, 09:14:35 am
Re: WG K7400 voltage questions
« Reply #1 on: October 30, 2014, 11:11:11 am »
Should be a test point, TP202, v=117.

Do you have a schematic?
Logged
In theory, there is no difference between theory and practice, but in practice.....there is!!

Sarver Systems

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 937
  • Last login:October 07, 2020, 12:46:05 am
Re: WG K7400 voltage questions
« Reply #2 on: October 30, 2014, 11:23:54 am »
Yes.

I was 90% sure it was TP202, but I wanted to verify.

Thank you!
Logged

kardenm

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 181
  • Last login:June 13, 2019, 09:14:35 am
Re: WG K7400 voltage questions
« Reply #3 on: October 30, 2014, 12:42:07 pm »
Logged
In theory, there is no difference between theory and practice, but in practice.....there is!!

Sarver Systems

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 937
  • Last login:October 07, 2020, 12:46:05 am
Re: WG K7400 voltage questions
« Reply #4 on: October 30, 2014, 12:47:18 pm »
I saw that TP203 is listed as a higher voltage, so I thought it might be for B+.

Speaking of those voltages, I do have another question.

It says at the bottom that some are in reference to chassis ground (black wire to the metal frame) while others are in reference to AC ground (black wire to green wire on AC input). But isn't the green wire attached to the chassis anyways? Hence, AC ground and chassis ground are now the same.

Confused!
Logged
Pages: [1]
  
Go Up
« previous next »