Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Paint prep for wrap  (Read 2043 times)

0 Members and 1 Guest are viewing this topic.

fluentd

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 72
  • Last login:October 20, 2014, 07:30:41 pm
  • I want to build my own arcade controls!
Paint prep for wrap
« on: October 06, 2014, 06:01:48 pm »
I was wondering if everyone was using a specific type of paint to prep there cabinet for a wrap? I figured a foam roller with any old black gallon paint would work but wanted to see if there was anything specific to use?

taylormadelv

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 377
  • Last login:February 18, 2019, 05:46:59 pm
Re: Paint prep for wrap
« Reply #1 on: October 08, 2014, 04:31:43 pm »
Gloss or semi gloss works best for me.

ChadTower

  • Chief Kicker - Nobody's perfect, including me. Fantastic body.
  • Trade Count: (+12)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 38212
  • Last login:June 22, 2025, 04:57:38 pm
Re: Paint prep for wrap
« Reply #2 on: October 09, 2014, 10:27:52 am »

Wouldn't gloss work the least well?  If you do a good job on the paint there is less for the wrap to adhere onto. 

It really depends on how much of the side you're going to wrap.  If you are going to fully cover it I would use a dark primer.

taylormadelv

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 377
  • Last login:February 18, 2019, 05:46:59 pm
Re: Paint prep for wrap
« Reply #3 on: October 09, 2014, 06:05:38 pm »
I discovered with vinyl that a slick, glossy surface worked best. Any surface that was absorbent, like bare wood or a primed surface, tended to have poor adhesion of the vinyl. As you probably have read in other places, vinyl will reveal every single tiny flaw in the surface you are working with.