Author Topic: Makvision M3129DF-TS picture off screen at 31khz. (Read 1133 times)

Supersonick · « **on:** September 21, 2014, 04:45:12 pm »

Hello,
I have some problem with arcade monitor Makvision M3129DF-TS . I am using Grovymame, and the problem I have is with 31khz games like Wargods, NFL Blitz etc.. when monitor switch to 31khz the image is not centered, half of it is out of the monitor (to the left) and the rest of the monitor is showing black/grey area..I verify this is hardware issue, as XP boot logo is off centered as well.
Is there some way to have the monitor centered automatically when switch to 31khz? Or do I have to play with potentiometer every time?
Thanks for your comments!
Regards.

grantspain · « **Reply #1 on:** September 21, 2014, 04:49:18 pm »

there is a small daughter board just behind the flyback,this has a 31khz horizontal hold pot-it may just need a minor adjustment


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Makvision M3129DF-TS picture off screen at 31khz. (Read 1133 times)

Supersonick

Makvision M3129DF-TS picture off screen at 31khz.

grantspain

Re: Makvision M3129DF-TS picture off screen at 31khz.