Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: WG 25K8112 Single Horizontal line  (Read 1859 times)

0 Members and 1 Guest are viewing this topic.

FullmetalHeart

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 65
  • Last login:August 04, 2015, 07:32:18 pm
  • I want to build my own arcade controls!
WG 25K8112 Single Horizontal line
« on: July 01, 2014, 05:15:39 pm »
Inside a former Virtual fighter 1. I don't know how to wire up the monitor to the isolated transformer and thats if I can use the transformer that I have. It came out of a Marvel Superheros vs Capcom cabinet. I think the monitor is a WG k8000 and I'm trying to put tekken 3 in the cabinet.





« Last Edit: July 06, 2014, 08:50:15 pm by FullmetalHeart »
Logged
“A lesson without pain is meaningless.
For you cannot gain anything without sacrificing something else in return,
but once you have overcome it and made it your own...
you will gain an irreplaceable fullmetal heart.”

FullmetalHeart

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 65
  • Last login:August 04, 2015, 07:32:18 pm
  • I want to build my own arcade controls!
Re: Powering arcade monitor ?
« Reply #1 on: July 02, 2014, 12:43:19 am »
Blown cap I had to change  :dunno

Logged
“A lesson without pain is meaningless.
For you cannot gain anything without sacrificing something else in return,
but once you have overcome it and made it your own...
you will gain an irreplaceable fullmetal heart.”

FullmetalHeart

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 65
  • Last login:August 04, 2015, 07:32:18 pm
  • I want to build my own arcade controls!
Re: Powering arcade monitor ?
« Reply #2 on: July 05, 2014, 09:09:07 pm »
I picked up another Isolation Transformer. IDK if I can use this one either.  Any Help?


Logged
“A lesson without pain is meaningless.
For you cannot gain anything without sacrificing something else in return,
but once you have overcome it and made it your own...
you will gain an irreplaceable fullmetal heart.”

FullmetalHeart

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 65
  • Last login:August 04, 2015, 07:32:18 pm
  • I want to build my own arcade controls!
Re: Powering WG K8000 ?
« Reply #3 on: July 06, 2014, 08:49:23 pm »
There really isn't much info about this monitor online but after hours upon hours I found out how to power the monitor. The 4 wires 2 red 2 orange required 2 different vacs. The 2 reds needed 25 vac and the 2 orange needed 120 vac. So I went to radioshack and picked up a 25 vac transformer. After wiring everything up I get a Single Horizontal Line on the monitor.

Logged
“A lesson without pain is meaningless.
For you cannot gain anything without sacrificing something else in return,
but once you have overcome it and made it your own...
you will gain an irreplaceable fullmetal heart.”

FullmetalHeart

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 65
  • Last login:August 04, 2015, 07:32:18 pm
  • I want to build my own arcade controls!
Re: WG 25K8112 Single Horizontal line
« Reply #4 on: July 09, 2014, 09:42:29 am »
Pulled the board out



Logged
“A lesson without pain is meaningless.
For you cannot gain anything without sacrificing something else in return,
but once you have overcome it and made it your own...
you will gain an irreplaceable fullmetal heart.”
Pages: [1]
  
Go Up
« previous next »