Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Wells U5000 green channel problem  (Read 909 times)

0 Members and 1 Guest are viewing this topic.

Bradh

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 12
  • Last login:September 23, 2018, 12:38:49 am
Wells U5000 green channel problem
« on: July 01, 2014, 12:21:14 am »
Hey Everyone!
I'm having an intermittent issue with my green channel on my Wells U5000 monitor with my mame setup.  Running Ultimarc's newest video card with jpac and ipac. 
I'm not sure where to start so I thought I would see with the professionals say on this issue.
Sometimes my green won't show up.  I can shut off the monitor and restart the system and the green channel will not come through.  If I turn the contrast on the remote board then I can get the green to come back.  Sometimes it will show for awhile and then cut back out.  What are your thoughts on what the issue may be?
Thanks in advance!

Brad

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6177
  • Last login:July 16, 2025, 06:33:55 pm
Re: Wells U5000 green channel problem
« Reply #1 on: July 01, 2014, 10:32:48 am »
bad connection on green circuit,green drive transistor or the transistor itself
very common problem

Bradh

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 12
  • Last login:September 23, 2018, 12:38:49 am
Re: Wells U5000 green channel problem
« Reply #2 on: August 18, 2014, 10:16:15 pm »
Thanks Grantspain!
It ended up being the transistor. No problems since I changed it out. Thanks again!