Arcade Collecting > Merit/JVL Touchscreen
Trying to power up a Megatouch motherboard
mahkeymike:
--- Quote from: gio_aus on June 11, 2014, 10:22:45 am --- Any other solutions?
--- End quote ---
Another cpu, ram, battery, replace any caps that are leaking or look like they are bulging... :dunno
gio_aus:
had no luck with different cpu, ram or battery. don't notice anything wrong with the caps.
mahkeymike:
--- Quote from: gio_aus on June 12, 2014, 10:42:34 am ---had no luck with different cpu, ram or battery. don't notice anything wrong with the caps.
--- End quote ---
You seem very determined to resurrect this board which is most likely dead. It seems from your original post, its just a spare so why so much determination? If you have a old maxx cab you are trying to get working you can retrofit newer hardware. You can even get ION going on it. Theres cheap motherboards like the asus A7n8x-la that will work straight out of the box with no software patching needed. You can even use the 13 inch CRT and touchscreen glass. You just need to get a microtouch exII controller to replace the SMT-3 because for some reason they black listed the SMT-3 from force and ion software. Although for some reason it works with 2011 and 2012 ION software. Might even work with 2013 and 2014 but i dont have those versions to test so cant verify.
gio_aus:
apart from being stubborn ;D, i thought i'd give it a good go trying to make use of these spare parts. I decided to try another ATX to AT adapter and finally got it working. I however am now stuck on this screen, any suggestions?
mahkeymike:
--- Quote from: gio_aus on July 03, 2014, 08:38:23 am ---apart from being stubborn ;D, i thought i'd give it a good go trying to make use of these spare parts. I decided to try another ATX to AT adapter and finally got it working. I however am now stuck on this screen, any suggestions?
--- End quote ---
Congratz man, never would have guessed it was a bad AT adapter. That kernel panic means linux failed to load. If your game is hard drive based, it probably has bad sectors, or some files could have got corrupted.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version