July 22, 2025, 05:30:33 am
Home
Help
Search
Login
Register
News:
Support this site
Shop
Amazon
through our link. Thank you!
Forum notices to gmail.com addresses are working. Microsoft addresses are still not.
The NEW Build Your Own Arcade Controls
|
Arcade Collecting
|
Miscellaneous Arcade Talk
|
Pin-out schematics for the "jamma connector" on non-jamma machines?
Main
Restorations
Software
Audio/Jukebox/MP3
Everything Else
Buy/Sell/Trade
Project Announcements
Monitor/Video
GroovyMAME
Merit/JVL Touchscreen
Meet Up
Retail Vendors
Driving & Racing
Woodworking
Software Support Forums
Consoles
Project Arcade
Reviews
Automated Projects
Artwork
Frontend Support Forums
Pinball
Forum Discussion
Old Boards
Raspberry Pi & Dev Board
controls.dat
Linux
Miscellaneous Arcade
Wiki Discussion
Old Archives
Lightguns
Arcade1Up
Try the site in https mode
Site News
Unread posts
|
New Replies
|
Recent posts
|
Rules
|
Chatroom
|
Wiki
|
File Repository
|
RSS
|
Submit news
« previous
next »
Send this topic
Print
Pages: [
1
]
Go Down
Author
Topic: Pin-out schematics for the "jamma connector" on non-jamma machines? (Read 3039 times)
0 Members and 1 Guest are viewing this topic.
Sarver Systems
Trade Count:
(
0
)
Full Member
Offline
Posts: 937
Last login:October 07, 2020, 12:46:05 am
Pin-out schematics for the "jamma connector" on non-jamma machines?
«
on:
January 10, 2014, 12:34:35 am »
Does anyone know of a place that has downloadable schematics or pictures of the jamma pinouts for non-jamma games?
For example:
Dig-Dug
Frogger
Galaga
I'm building some of these:
http://homearcade.org/BBBB/adaptors.html
Logged
Ken Layton
Guru
Trade Count:
(
+1
)
Full Member
Offline
Posts: 7061
Last login:October 12, 2021, 12:25:59 am
Technician
Re: Pin-out schematics for the "jamma connector" on non-jamma machines?
«
Reply #1 on:
January 10, 2014, 01:27:29 am »
http://arcarc.xmission.com/Tech/Pinouts%20%28new%20Sep-21-2003%29/
http://arcarc.xmission.com/Tech/Pinouts/
http://www.crazykong.com/pins/
Logged
CraftyMech
Trade Count:
(
+9
)
Full Member
Offline
Posts: 492
Last login:July 29, 2023, 08:08:45 pm
I love the smell of solder in the morning...
Re: Pin-out schematics for the "jamma connector" on non-jamma machines?
«
Reply #2 on:
January 10, 2014, 01:42:47 am »
Dig Dug & Galaga can be found here:
http://www.mikesarcade.com/cgi-bin/spies.cgi?action=url&type=pinout&page=Galaga.html
Logged
BitKit 8bit FPGA Multi -
http://craftymech.com
matsadona
Trade Count:
(
0
)
Full Member
Offline
Posts: 760
Last login:October 28, 2023, 06:00:12 am
Re: Pin-out schematics for the "jamma connector" on non-jamma machines?
«
Reply #3 on:
January 10, 2014, 04:12:48 am »
A lot of manuals can be found here as well:
http://pdf.textfiles.com/manuals/ARCADE/
Logged
Building, collecting and playing arcade machines
Sarver Systems
Trade Count:
(
0
)
Full Member
Offline
Posts: 937
Last login:October 07, 2020, 12:46:05 am
Re: Pin-out schematics for the "jamma connector" on non-jamma machines?
«
Reply #4 on:
January 10, 2014, 09:19:33 am »
Thank you very much! That's exactly what I needed!
Logged
Sarver Systems
Trade Count:
(
0
)
Full Member
Offline
Posts: 937
Last login:October 07, 2020, 12:46:05 am
Re: Pin-out schematics for the "jamma connector" on non-jamma machines?
«
Reply #5 on:
January 10, 2014, 09:31:25 am »
Is there a better option than this for the jamma connector itself? For soldering directly to the fingerboard.
http://shop.cajunarcade.com/Edge-Connector-Black-JAMMA-28-56-Pin-Edge-Connector-Black.htm
Logged
CraftyMech
Trade Count:
(
+9
)
Full Member
Offline
Posts: 492
Last login:July 29, 2023, 08:08:45 pm
I love the smell of solder in the morning...
Re: Pin-out schematics for the "jamma connector" on non-jamma machines?
«
Reply #6 on:
January 10, 2014, 12:56:04 pm »
Try here:
http://www.jammaboards.com/store/
Connectors->edge connectors
Logged
BitKit 8bit FPGA Multi -
http://craftymech.com
Sarver Systems
Trade Count:
(
0
)
Full Member
Offline
Posts: 937
Last login:October 07, 2020, 12:46:05 am
Re: Pin-out schematics for the "jamma connector" on non-jamma machines?
«
Reply #7 on:
January 10, 2014, 01:52:39 pm »
Look good?
http://www.jammaboards.com/store/56-pin-card-edge-connector-396mm-156-pitch-ec-56.html
I'll be sure to grab a doxen or so keys too, just in case.
And then I'll grab one of these too:
http://www.jammaboards.com/store/jamma-full-cabinet-wiring-harness-loom-jamma-h1.html
I've already got one of these:
http://www.jammaboards.com/store/protective-cover-shell-for-jamma-56-pin-connector.html
Logged
CraftyMech
Trade Count:
(
+9
)
Full Member
Offline
Posts: 492
Last login:July 29, 2023, 08:08:45 pm
I love the smell of solder in the morning...
Re: Pin-out schematics for the "jamma connector" on non-jamma machines?
«
Reply #8 on:
January 10, 2014, 10:22:14 pm »
Do you have a need for the 56pin edge connectors? The Dig Dug & Galaga you mentioned would take 44pin edge connectors. The fingerboard is what will provide the 56 location edge for your Jamma harness.
Logged
BitKit 8bit FPGA Multi -
http://craftymech.com
Sarver Systems
Trade Count:
(
0
)
Full Member
Offline
Posts: 937
Last login:October 07, 2020, 12:46:05 am
Re: Pin-out schematics for the "jamma connector" on non-jamma machines?
«
Reply #9 on:
January 10, 2014, 10:31:03 pm »
Thank you for catching that. Silly of me to think they were all 56-pin standard.
Logged
Send this topic
Print
Pages: [
1
]
Go Up
« previous
next »
The NEW Build Your Own Arcade Controls
|
Arcade Collecting
|
Miscellaneous Arcade Talk
|
Pin-out schematics for the "jamma connector" on non-jamma machines?