Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Autoswitching ms9 woes  (Read 936 times)

0 Members and 1 Guest are viewing this topic.

brad808

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 818
  • Last login:May 22, 2023, 08:18:15 pm
Autoswitching ms9 woes
« on: December 11, 2013, 07:51:48 pm »
So I have a versus city cabinet with 2 ms929's in it. I have it hooked up through a jpac and during boot I hear a ton of clicking until it hits windows. I'm guessing the monitors are autoswitching between 15k and 24k and having a hard time getting a lock so they keep bouncing back and forth. I'm looking for ideas on how to stop this from happening.

So far I've come up with disabling the relay on the chassis somehow (rather not do this just because It'll be a pain to undo should I throw in a jamma game thats 24khz). Or I've also thought about using a 12v delay relay to the power supply to stop the monitors from turning on for a few seconds after the computer.

Any other ideas?

brad808

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 818
  • Last login:May 22, 2023, 08:18:15 pm
Re: Autoswitching ms9 woes
« Reply #1 on: December 16, 2013, 09:17:22 pm »
anyone?

mgb

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3500
  • Last login:January 06, 2025, 09:39:00 pm
  • North East, US
Re: Autoswitching ms9 woes
« Reply #2 on: December 16, 2013, 10:59:18 pm »
It seems like delaying the turning on of the monitors is your best bet.

You can use a time control relay or maybe just simply put in manual switches so you can power the monitors on when you feel is safe.