Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: My $58 Acrylic/Polycarbonate 90 degree bending machine  (Read 7491 times)

0 Members and 1 Guest are viewing this topic.

matt4949

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 431
  • Last login:November 07, 2021, 09:24:54 pm
  • Poor Kids Only Got To Watch Video Games
My $58 Acrylic/Polycarbonate 90 degree bending machine
« on: November 24, 2013, 07:33:15 pm »
OK, Here it is. Took about a day to build. I can bend sheets as large as 32" wide.
PARTS
2 Hinges                             $3
1 Heat Strip                        $ 46        http://www.ebay.com/itm/BRISKHEAT-BIH051040L-BIH-HEAVY-INSULATED-HEAT-TAPES-1-2x48-/331028469562?pt=LH_DefaultDomain_0&hash=item4d12d5973a

2 sheets 3/4 MDF 2'x3'        $ 9
Nuts and Bolts                     $ 0 (stole em from work)
Logged

matt4949

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 431
  • Last login:November 07, 2021, 09:24:54 pm
  • Poor Kids Only Got To Watch Video Games
Re: My $58 Acrylic/Polycarbonate 90 degree bending machine
« Reply #1 on: November 24, 2013, 07:37:31 pm »
Thank You Selfie and Thank You Rodney for your advice and inspiration. It came out better than I expected.
Logged

ChadTower

  • Chief Kicker - Nobody's perfect, including me. Fantastic body.
  • Trade Count: (+12)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 38204
  • Last login:July 30, 2025, 03:29:53 pm
Re: My $58 Acrylic/Polycarbonate 90 degree bending machine
« Reply #2 on: November 27, 2013, 03:04:29 pm »

Pretty cool.   :applaud:
Logged

Generic Eric

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4521
  • Last login:Yesterday at 02:56:16 am
  • Restore! Don't maim for MAME, build from scratch!
    • forum.arcadecontrols.com/index.php/topic,143226.0.html
Re: My $58 Acrylic/Polycarbonate 90 degree bending machine
« Reply #3 on: November 27, 2013, 03:09:21 pm »
Looks neat.

How does it perform on  angle greater than 90º?  Could it make a 90º with a larger radius?  Looks neat.
Logged

matt4949

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 431
  • Last login:November 07, 2021, 09:24:54 pm
  • Poor Kids Only Got To Watch Video Games
Re: My $58 Acrylic/Polycarbonate 90 degree bending machine
« Reply #4 on: November 27, 2013, 05:03:39 pm »
Quote from: Generic Eric on November 27, 2013, 03:09:21 pm
Looks neat.

How does it perform on  angle greater than 90º?  Could it make a 90º with a larger radius?  Looks neat.
I can set and hold an angle from about 15 to 110 degrees. It makes a very tight radius. I was hoping for a little more rounded  radius than I got. The 90 is pretty square. I had to make some adjustments to the spacing of the heat strip to the plastic. I found about a 1/4 inch of space best and no touching what so ever.
Logged

AlienInferno

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 516
  • Last login:August 05, 2025, 12:05:16 am
Re: My $58 Acrylic/Polycarbonate 90 degree bending machine
« Reply #5 on: November 27, 2013, 07:41:34 pm »
Good job building the bender. I built one myself using a similiar heating element. Never would I have thought about making the folding work table. I just bend mine with the edge of a table.

Sent from my SAMSUNG-SGH-I747 using Tapatalk

Logged
Pages: [1]
  
Go Up
« previous next »