k7000 Black bar in middle, horiz position off

[Zunni]

So I finally have progressed to getting a picture on my monitor and the picture is actually really good.

My last problem is I had the screen shifted to the right causing the image to be wrapped and a black bar in the middle of the screen. I had a broken horizontal position pot on my control board, which I replaced with a new 500 Ohm pot. Now I can slightly adjust the black bar around a bit but I can't get it off the screen.

I looked at the spec and it's supposed to be a 500 ohm trim pot (the broken one also said 500 ohm).

How can I shift this black bar out of the middle of the screen and shift the image so it's sitting correctly...

Is it a sync issue? Is it that the pot needs to be a larger size perhaps?

Thanks for your help through this, it's coming together beautifully.

[ed12]

500 ohm or 500k ohm ?
large dif there

ed

[Zunni]

Hey Ed:

According to what I can see on the existing Pot and what's on page 23 of the manual found here

http://arcarc.xmission.com/PDF_Monitors/Wells%20Gardner%20K7000%20Manual.pdf

Cross referenced with the H-Pos pot found on page 20 (labelled Vr1) indicates it's a 500, other entries have the K beside them so I feel confident that it's just 500 Ohm.

If I got my hands on a 1K or 2K would that be worth trying in that spot to see if it makes a larger difference?

[ed12]

the 1k would be
as it would not be that far out of range
i will chk my stash of control boards and let u know what i get

ed

[lilshawn]

yes it is indeed a 500 ohm.

[Zunni]

Now that the holidays are over, I've come back to this.

I'm stymied as I've tried a 1k and 2k ohm pot and it barely moves the picture more than an inch or two.

Does anyone have any additional ideas on what I may be looking at here?

I can provide whatever information is necessary to try to squash this problem. It sucks having this beautiful cabinet sitting unfinished because of a lame video issue..

[buffett]

if you do not put a 500 ohm pot in there the adjustment will never work correctly.

if you need a pot i stock them.
if you need the chassis and remote board repaired i can do it.

if you are in the US email me from my website.

thearcadebuffett.com

Peace
Buffett