Author Topic: An Original Fix It Felix Build --- 100% Complete! (Read 101265 times)

Rick · « **Reply #200 on:** February 18, 2015, 11:50:27 am »

Quote from: yotsuya on February 18, 2015, 11:45:14 am

...you gently nudged me in that direction (with YOUR small penis, btw). For that, I was grateful.

So it didn't hurt that bad?

jdbailey1206 · « **Reply #201 on:** February 18, 2015, 12:05:35 pm »

Quote from: yotsuya on February 18, 2015, 11:45:14 am

and you gently nudged me in that direction (with YOUR small penis, btw). For that, I was grateful.

Generic Eric · « **Reply #202 on:** February 18, 2015, 12:46:11 pm »

Quote from: jdbailey1206 on February 18, 2015, 09:15:11 am

I forgot in my last post but I wanted to thank the following people for helping me in this endeavor:

Automark, meyer980, wp34, Generic Eric, Pixel Paul, Louis Tully, pinballsmith, jmike, YOTSUYA, Malenko, SORHP, talkgeek, 404, PL1, Santoro, koolmoecraig, Sjaak, ridicrick, ChanceKJ, JDFan, Rick. (And anybody I forgot...)

If you were listed but didn't feel like you helped in any way your words of encouragement motivated me immensely. I tend to get bored with things and your words helped me reach the finish. Thanks again guys.

Looks great! Your pics were very detailed, and no doubt will help others.

I still don't understand why there is such a large space between the CP and bottom of the bezel?

ChanceKJ · « **Reply #203 on:** February 18, 2015, 02:41:22 pm »

Quote from: Generic Eric on February 18, 2015, 12:46:11 pm

....I still don't understand why there is such a large space between the CP and bottom of the bezel?

What space?

Generic Eric · « **Reply #204 on:** February 18, 2015, 02:44:27 pm »

Quote from: ChanceKJ on February 18, 2015, 02:41:22 pm

Quote from: Generic Eric on February 18, 2015, 12:46:11 pm
....I still don't understand why there is such a large space between the CP and bottom of the bezel?

What space?

yotsuya · « **Reply #205 on:** February 18, 2015, 02:45:17 pm »

That's part of the Nintendo cab design. Some cabs have instructions there, other's don't.

ChanceKJ · « **Reply #206 on:** February 18, 2015, 02:45:53 pm »

i can't tell if you're bugging him for not putting an instruction card, or if you seriously have never noticed that on Nintendo cabs before....

Generic Eric · « **Reply #207 on:** February 18, 2015, 02:48:40 pm »

Quote from: yotsuya on February 18, 2015, 02:45:17 pm

That's part of the Nintendo cab design. Some cabs have instructions there, other's don't.

Now I understand.

@ChanceKJ
I couldn't place it, so I asked

ChanceKJ · « **Reply #208 on:** February 18, 2015, 02:53:52 pm »

The sad thing is i don't blame you, it brings to light a stark realization to me that i've been obsessing about Nintendo cabs for too long. $:-\$

yotsuya · « **Reply #209 on:** February 18, 2015, 03:03:24 pm »

Quote from: ChanceKJ on February 18, 2015, 02:53:52 pm

The sad thing is i don't blame you, it brings to light a stark realization to me that i've been obsessing about Nintendo cabs for too long. $:-\$

Yes, yes it does.

ChanceKJ · « **Reply #210 on:** February 18, 2015, 04:18:52 pm »

...you just wait till the weekend.

jdbailey1206 · « **Reply #211 on:** February 18, 2015, 07:05:20 pm »

Quote from: ChanceKJ on February 18, 2015, 04:18:52 pm

...you just wait till the weekend.

Why? Wazgunna happen? Huh? What? You tell me. This is 'merica! Now! Tell me now! Tell me wuzgunna happen.

ChanceKJ · « **Reply #212 on:** February 18, 2015, 07:42:42 pm »

That's " 'Merica "

Im in Canada.

yotsuya · « **Reply #213 on:** February 18, 2015, 08:33:03 pm »

He's picking up a Nintendo cabinet, obviously. And since he's in Canada, it's either from a Mountie, a hockey player, or a small brown beaver. Duh.

jdbailey1206 · « **Reply #214 on:** February 18, 2015, 08:35:53 pm »

yotsuya · « **Reply #215 on:** February 18, 2015, 08:37:18 pm »

Quote from: jdbailey1206 on February 18, 2015, 08:35:53 pm

No, that's not racist, that's stereotyping. Duh.

ChanceKJ · « **Reply #216 on:** February 18, 2015, 08:52:39 pm »

Quote from: yotsuya on February 18, 2015, 08:33:03 pm

...or a small brown beaver.

Whaaaaat? Get outta town! Since when did your mom move to Saskatoon?

yotsuya · « **Reply #217 on:** February 18, 2015, 08:53:39 pm »

Dude, moms are off limits, bro. No bueno.

ChanceKJ · « **Reply #218 on:** February 18, 2015, 08:54:09 pm »

Since when?!

yotsuya · « **Reply #219 on:** February 18, 2015, 08:58:02 pm »

Since I promised your mom we were through!

ChanceKJ · « **Reply #220 on:** February 18, 2015, 08:59:57 pm »

Um... You might want to go to a clinic and get checked.

...Seriously bro.

Edit: Here, i googled this for you:
http://www.stdcheck.com/?loc=Phoenix

Time is a factor.

yotsuya · « **Reply #221 on:** February 18, 2015, 09:06:30 pm »

Dude, that's your MOM you're talking about.

ChanceKJ · « **Reply #222 on:** February 18, 2015, 09:09:39 pm »

I'm aware.

And may i remind you, you're wasting valuable time. $:-\$

yotsuya · « **Reply #223 on:** February 18, 2015, 09:11:10 pm »

You should knock your block off for talking about your mother like that.

ChanceKJ · « **Reply #224 on:** February 18, 2015, 09:12:35 pm »

Speaking of blocks, i hear your mother's making better money working the corner of a new one.

yotsuya · « **Reply #225 on:** February 18, 2015, 09:13:48 pm »

Who hurt you, man?

ChanceKJ · « **Reply #226 on:** February 18, 2015, 09:16:05 pm »

i've got another one for this,

really i do...

but i'm having a hard time typing because i'm laughing so hard.

we've destroyed this thread enough.

Generic Eric · « **Reply #227 on:** February 18, 2015, 09:21:54 pm »

Quote from: jdbailey1206 on February 18, 2015, 07:05:20 pm

Quote from: ChanceKJ on February 18, 2015, 04:18:52 pm
...you just wait till the weekend.

Why? Wazgunna happen? Huh? What? You tell me. This is 'merica! Now! Tell me now! Tell me wuzgunna happen.

Hey Zeus! ~maybe its got to do with the DK he has been sitting on~ calm your tassles

jmike · « **Reply #228 on:** February 18, 2015, 11:09:00 pm »

Quote from: jdbailey1206 on February 18, 2015, 09:15:11 am

I forgot in my last post but I wanted to thank the following people for helping me in this endeavor:

Automark, meyer980, wp34, Generic Eric, Pixel Paul, Louis Tully, pinballsmith, jmike, YOTSUYA, Malenko, SORHP, talkgeek, 404, PL1, Santoro, koolmoecraig, Sjaak, ridicrick, ChanceKJ, JDFan, Rick. (And anybody I forgot...)

If you were listed but didn't feel like you helped in any way your words of encouragement motivated me immensely. I tend to get bored with things and your words helped me reach the finish. Thanks again guys.

Hey I made the "thank you" list (

).
But seriously this looks incredible. I'm finally gathering up all the parts for my Fix It Felix cab.
I actually tried to install the side art the same way on my cabaret but had a bit of trouble. Thinking it would be easier to put the cab on its side to install the art next time.
Thoughts?

ChanceKJ · « **Reply #229 on:** February 18, 2015, 11:14:13 pm »

I prefer to do the art with the cab on its side. Removing gravity as a factor just seems like the way to go.

jdbailey1206 · « **Reply #230 on:** February 19, 2015, 07:46:20 am »

Quote from: yotsuya on February 18, 2015, 08:37:18 pm

Quote from: jdbailey1206 on February 18, 2015, 08:35:53 pm

No, that's not racist, that's stereotyping. Duh.

Better?

Quote from: ChanceKJ on February 18, 2015, 09:16:05 pm

we've destroyed this thread enough.

No worries. The only thing that sounds like it might be destroyed is Yot's dick.

Quote from: Generic Eric on February 18, 2015, 09:21:54 pm

~ calm your tassles

That was prolly the most G Rated tassel gif I could find.

But in all seriousness I thought about tipping the cab over but to save time I decided just to try the top part first with the cab upright. It went pretty well so I threw caution to the wind and tried the rest and it came out fine. The real problem came when I applied the monitor bezel artwork. That was where I would like to see a tutorial. Or any tricks people have used. I watched a couple of videos online but they were useless. It might have been the material I used also. I used a vinyl with a grey backing to keep the light from shining through (which I prolly won't use again) and the material itself may be why it was so hard to apply. Plus the glue seemed stronger on the bezel marquee material than the other vinyl.

And Chance are you seriously sitting on a cab? And speaking of your 'project', how many cabs are you working on in that thread?

yotsuya · « **Reply #231 on:** February 19, 2015, 08:09:26 am »

Quote from: jdbailey1206 on February 19, 2015, 07:46:20 am

No worries. The only thing that sounds like it might be destroyed is Yot's dick.

What's your fascination with my pee-pee all of a sudden, brah?

jdbailey1206 · « **Reply #232 on:** February 19, 2015, 08:17:53 am »

I was not the first to reference your tally whacker.

Quote from: Rick on February 18, 2015, 09:43:05 am
He's seen you in the showers?
Quote from: yotsuya on February 18, 2015, 11:45:14 am
(with YOUR small penis, btw). For that, I was grateful.
Quote from: ChanceKJ on February 18, 2015, 08:59:57 pm
Um... You might want to go to a clinic and get checked.

...Seriously bro.

Edit: Here, i googled this for you:
http://www.stdcheck.com/?loc=Phoenix

Time is a factor.

After all that penis referencing that went back and forth all you could remember is the two times I brought up your dick outside of this post?

Oh yeah. I forgot to post this about moms.

Okay now we have been officially derailed.

jdbailey1206 · « **Reply #233 on:** February 19, 2015, 08:54:59 am »

As you can see above Rick that is the instruction card that, from what I could find was never on any of the manufactured FFJR cabs. The funny thing is though if you watch the arcade scene in the beginning of Wreck It Ralph and you look closely you can see it on the cab. I added a picture of the scene below. Squint and you can see it.

And as you can see in the photo below most of the Nintendo cabs had them. You really cant see Popeye, Mario Bros, or Punch out but I believe Popeye and Mario Bros had one but Punch out did not have one. Mario Bros instruction card was larger and placed dead middle of the CP and Punch Out didn't have one due to the way the monitor bezel ran right into the control panel.

ChanceKJ · « **Reply #234 on:** February 19, 2015, 09:20:59 am »

/Droool, now that's a good nintendo row.

When you say "sitting on a cab" you don't mean that literally, I hope?

And why do you get the impression that it's two... Er, more than one?

jdbailey1206 · « **Reply #235 on:** February 19, 2015, 09:31:54 am »

Never mind. I saw your cocktail cab and assumed it was a DK cocktail but I was wrong. Now that I see it I can see it is not. Looks like you used it as a test bed. So I can assume you have a Nintendo cab in the wings or you have built it already....

jmike · « **Reply #236 on:** February 19, 2015, 11:38:34 am »

About to have the marquee printed can anyone confirm the dimensions?
Thanks.

ChanceKJ · « **Reply #237 on:** February 19, 2015, 11:45:25 am »

Quote from: jdbailey1206 on February 19, 2015, 09:31:54 am

Never mind. I saw your cocktail cab and assumed it was a DK cocktail but I was wrong. Now that I see it I can see it is not. Looks like you used it as a test bed. So I can assume you have a Nintendo cab in the wings or you have built it already....

...maybe.

yotsuya · « **Reply #238 on:** February 19, 2015, 11:46:02 am »

Quote from: ChanceKJ on February 19, 2015, 11:45:25 am

Quote from: jdbailey1206 on February 19, 2015, 09:31:54 am
Never mind. I saw your cocktail cab and assumed it was a DK cocktail but I was wrong. Now that I see it I can see it is not. Looks like you used it as a test bed. So I can assume you have a Nintendo cab in the wings or you have built it already....

...maybe.

You cabteaser, you!

ChanceKJ · « **Reply #239 on:** February 19, 2015, 11:49:50 am »

You guys know me. If I had built it there would be a dozen pictures showing each type of screw or nail I used, from multiple angles.

I'm not 1000% sure I have what I'm looking at yet, so I didn't want to completely spill the beans. But I'm going to look at a cab on Saturday.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news