Author Topic: Using remote control software (Read 1932 times)

wglong · « **on:** August 08, 2013, 04:43:35 pm »

Is it safe to use VNC, logmein, or other remote software on your Groovymame machine or will it mess with any settings? I use VNC to connect to my box so I can setup the software; however, I know these software usually install mirror video drivers. I'm in the process of setting everything up and Have been using VNC and I'm about to connect my WG D7000 for the first time.

Calamity · « **Reply #1 on:** August 10, 2013, 10:23:37 am »

Hi wglong,

Yes, this kind of software is known to cause issues. Usually people who reported GroovyMAME running full speed, which is a sympthom of a non working v-sync functionality, found that disabling remote control software fixed the problem. This doesn't mean, however, that *all* remote control software must cause conflicts. But definitely I would avoid it unless I'm 100% sure it won't cause issues.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Using remote control software (Read 1932 times)

wglong

Using remote control software

Calamity

Re: Using remote control software