Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: TV Flickers  (Read 1013 times)

0 Members and 1 Guest are viewing this topic.

reptar111

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • Last login:July 28, 2013, 09:25:48 pm
  • I want to build my own arcade controls!
TV Flickers
« on: July 06, 2013, 09:56:04 pm »
I have a 68cm Panasonic Flatscreen TV with two standard RCA (1 Video, 2 Audio inputs) and one set of RGB RCA input. I have bought a 15pin VGA to RGB RCA to connect my PC (Windows 7) to my TV. All I get is flickering. When I change screen input from PC to TV, the TV screen looks as if it is swapping displays going from black screen to flickering screen. I have tried to reduce the resolutions to 800x600 and lower the frequency to 60Hz. Still no luck. I tested out an old DVD player and this displays fine on the TV using the RGB TCA input so it must be a problem with the PCs input. Is there anything I am missing here with computer settings? The lead was straight out of the box. I read someone about syncing PAL settings? Does this ring any bells.

Any advice is welcome! I am going nuts...

Cheers
Logged
Pages: [1]
  
Go Up
« previous next »