Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Multistandard PAL/NTSC euro scart TV  (Read 2874 times)

0 Members and 1 Guest are viewing this topic.

EvilDindon

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 47
  • Last login:December 03, 2014, 11:34:33 am
Multistandard PAL/NTSC euro scart TV
« on: May 27, 2013, 10:40:20 am »
Hi,

Just installed calamity and groovy, it rocks !

What is the best preset to use in Vmmaker.ini (and mame.ini) for a scart RGB pal/ntsc TV ?

I let the default "CUSTOM" preset.

Is taht right ?

Cheers,

Mike from France.
Logged

Calamity

  • Moderator
  • Trade Count: (0)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 7505
  • Last login:June 10, 2026, 02:56:33 am
  • Quote me with care
Re: Multistandard PAL/NTSC euro scart TV
« Reply #1 on: May 28, 2013, 06:00:16 pm »
Hi EvilDindon,

For a SCART TV, just use the default values in vmmaker ("CUSTOM", and the default monitor_specs line). This will be good enough in most cases, although some centering from service menu may be required.

Logged
Important note: posts reporting GM issues without a log will be IGNORED.
Steps to create a log:
 - From command line, run: groovymame.exe -v romname >romname.txt
 - Attach resulting romname.txt file to your post, instead of pasting it.

CRT Emudriver, VMMaker & Arcade OSD downloads, documentation and discussion:  Eiusdemmodi

EvilDindon

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 47
  • Last login:December 03, 2014, 11:34:33 am
Re: Multistandard PAL/NTSC euro scart TV
« Reply #2 on: May 29, 2013, 02:48:09 am »
Ok cool.

You mean the service menu of the TV, right ?

Can't we center only with ArcadeOS ?
Logged

Calamity

  • Moderator
  • Trade Count: (0)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 7505
  • Last login:June 10, 2026, 02:56:33 am
  • Quote me with care
Re: Multistandard PAL/NTSC euro scart TV
« Reply #3 on: June 04, 2013, 01:30:35 pm »
Quote from: EvilDindon on May 29, 2013, 02:48:09 am
Ok cool.

You mean the service menu of the TV, right ?

Can't we center only with ArcadeOS ?

You can center the modelines with ArcadeOSD, but that will only be effective for emulators that use static modelines. GroovyMAME updates the modelines on the fly so your adjustments will be overridden.
Logged
Important note: posts reporting GM issues without a log will be IGNORED.
Steps to create a log:
 - From command line, run: groovymame.exe -v romname >romname.txt
 - Attach resulting romname.txt file to your post, instead of pasting it.

CRT Emudriver, VMMaker & Arcade OSD downloads, documentation and discussion:  Eiusdemmodi
Pages: [1]
  
Go Up
« previous next »