Author Topic: (iCade) 60-in-1 Settings issue FIXED (Read 6885 times)

jmike · « **on:** April 06, 2013, 11:29:44 am »

Recently purchased an iCade 60-in-1 boards but I'm having trouble accessing the settings screen to set it to cocktail mode.

I hit "Test Switch" when powering on the board and get to the "screen adjust" page but I can't get to the next page. Instructions says to hit "Test" but that doesn't do anything. I've tried all Player1 and Player 2 buttons but can't seem to get to the next page.
The only button that does work is the "Test Switch" button again which sends me to the I/O page. There I can check to make sure all the inputs are working properly (and they are, even the "Test " button).
Can someone please tell me if there's a combination of buttons or maybe a Dip switch needs to be turned on so I can access the other setting pages, especially the one to convert it to Cocktail mode. This is one of the newer iCade 60-in-1 smaller boards.

Any help would be appreciated.

Thanks.

mebronx2000 · « **Reply #1 on:** April 07, 2013, 11:24:14 pm »

player 1 button number two works for me !

jmike · « **Reply #2 on:** April 08, 2013, 07:26:42 pm »

Thanks but I tried that and it didn't work. I recall you had issues with your 60-in-1
(Trying to get both players to play with the same controls) funny cause mine is set up that way already.
Will keep trying.

mebronx2000 · « **Reply #3 on:** April 08, 2013, 11:05:57 pm »

try and go into setup on the dip switch and not using the test button

jmike · « **Reply #4 on:** April 09, 2013, 09:05:13 am »

Quote from: mebronx2000 on April 08, 2013, 11:05:57 pm

try and go into setup on the dip switch and not using the test button

Without test button? You mean I can get to the settings screen just by turning on switch 4?

yotsuya · « **Reply #5 on:** April 09, 2013, 09:08:08 am »

Yes. I'm glad mebronx told you that. I was going to ask if you were still holding those buttons at startup, but thought 'Nah, he can't be!'

jmike · « **Reply #6 on:** April 09, 2013, 09:38:23 am »

Quote from: yotsuya on April 09, 2013, 09:08:08 am

Yes. I'm glad mebronx told you that. I was going to ask if you were still holding those buttons at startup, but thought 'Nah, he can't be!'

Guilty as charged

Okay will try it when I get home and report back.

to you both

yotsuya · « **Reply #7 on:** April 09, 2013, 09:42:54 am »

jmike, do you have a copy of the manual?

jmike · « **Reply #8 on:** April 09, 2013, 10:41:28 am »

Quote from: yotsuya on April 09, 2013, 09:42:54 am

jmike, do you have a copy of the manual?

No. Just been going with what I read online.

jmike · « **Reply #9 on:** April 10, 2013, 07:13:09 am »

Finally got into the set-up screen menus. Thanks for the manual PDF Yotsuya.
Now I can start planning the cocktail build.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: (iCade) 60-in-1 Settings issue FIXED (Read 6885 times)

jmike

(iCade) 60-in-1 Settings issue FIXED

mebronx2000

Re: (iCade) 60-in-1 Settings issue

jmike

Re: (iCade) 60-in-1 Settings issue

mebronx2000

Re: (iCade) 60-in-1 Settings issue

jmike

Re: (iCade) 60-in-1 Settings issue

yotsuya

Re: (iCade) 60-in-1 Settings issue

jmike

Re: (iCade) 60-in-1 Settings issue

yotsuya

Re: (iCade) 60-in-1 Settings issue

jmike

Re: (iCade) 60-in-1 Settings issue

jmike

Re: (iCade) 60-in-1 Settings issue